video corpo cad

Spindle axes EGC-BS-KF, with recirculating ball bearing guide
43Pages

{{requestButtons}}

Catalog excerpts

Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 1

Spindle axes EGC-BS-KF, with recirculating bail bearing guide

Open the catalog to page 1
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 2

Spindle axes EGC-BS-KF, with recirculating bail bearing guide FESTO AtagUnte Poaerful * Generousty si*ed profites with an oplimJsed crott section albrd maximum rigidiy and bad capadty * Speed. «ceterafton and torque 'esstarKeset a new standard Economlcal > In^Dontothetfchrkaldata* the spfodle arfs fcs a wtnner with lu scellent prke/performance ratio 1 Duelo theEGCshgh perfofwance « isoften possible to use a smaller Versatile 1 Diffrent spindle orKhes^ numerous si«s and variants sud» as protected guides open up a brod ranjre of applications 1 Space-saving position sensing with prcaimftv...

Open the catalog to page 2
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 3

O New Lubrcation adapter Spindle axes EGC-BS-KF, with recrculating bail bearing guide (H fealut es Sltde variants itaiard b.ide Eatendedstlde Mdicral slide Guide op f>iotected v With central lubrkatlon The protected giide deans the guide rail and protects the retire ulating bail bearing guide mth iheaidofan addltional ai pet rhe lubrication adapter enables the iride lo be permanentfy lubrkated usingsemiorrullyautomatlc retubricalion devices The adapter* are su i la Me for oils and greases Both lubrkabon adapters must be tonnected Compl鯨te System comprisingspndiearis. motor. molor...

Open the catalog to page 3
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 4

Spindle axes EGC-BS-KF, with recirculating bail bearing guide PenpNralsovefvfw 4 Internetwww (esta com/auto.1 Su biect lo change-3011/06

Open the catalog to page 4
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 5

Spindle axes EGC-BS-KF, with recrculating bail bearing guide Variants and accs sortes Type Brief description Page'lTterne隷 Emergency buffer with retainer A Foi avc*ding damage aMhe end stop in theevent of rnalfunction U r Ceniringpm/i|«vt ZBS.ZBH For ceniring loadsand andchmentson the sltfe * 2 ccnlnngplns/sleeves lixlidedln thescopeof del.vr'v br theaxJs 40 jj SwiKh lug X.Z.O.P.W.R For sensbg the slide position 33 4| Sfnsor mainec O.P.W* Adjtfrt tormounlingineindiKtivepro*^ thea*K 39 jjPraornity sensor. M8 O.P,tt* Օ Inducwpfoximity sensor. round design With the orter code aP, % Rf 1...

Open the catalog to page 5
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 6

Spindle axes EGC-BS-KF, with recirculating bail bearing guide Type codes EGC 70 500 BS KF MR GK Type EGC Spindle axis Size Stroke [mm] Drive function BS Ball screw spindle Spindle pitch Guide KF Recirculating ball bearing guide Stroke reserve Motor attachment position ML On the left MR On the right Slide GK Standard slide GV Extended slide GP Standard slide, protected GQ Extended slide, protected 6 Internet: www.festo.com/cataIog/... Subject to change-2011/06

Open the catalog to page 6
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 7

-o- New Lubrication adapter Spindle axes EGC-BS-KF, with recirculating bail bearing guide Type codes - Additional slide J KL Standard, left Additional slide KR Standard, right Lubrication function - Standard C Lubrication adapter Accessories enclosed separately F Foot mounting ...M Profile mounting ...B Mounting slot cover ...S Sensor slot cover ...Y Slot nut for mounting slot ...X Proximity sensor (SIES), inductive, slot type 8, PNP, N/O contact, cable 7.5 m ...Z Proximity sensor (SIES), inductive, slot type 8, PNP, N/C contact, cable 7.5 m ...A Emergency buffer with retainer ...O...

Open the catalog to page 7
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 8

Spindle axes EGC-BS-KF, with recirculating bail bearing guide Technical data Size 70 80 120 185 Spindle pitch 10 10 20 10 25 40 Design Electromechanical axis witl recirculating ball bearing s pindle Guide Recirculating ball bearing guide Mounting position Any Workingstroke GK/GP [mm] 50... 1,000 50 ...2,000 50 ...2,500 50 ...3,000 GV/GQ [mm] 50... 900 50 ... 1,900 50 ...2,400 50 ...2,900 Max. feed force Fx [N] 300 600 1,300 3,000 No-load torque [Nm] 0.1 0.1 0.2 0.5 0.6 1.5 at min. travel speed [m/s] 0.05 0.1 0.1 0.2 0.2 0.2 No-load torque [Nm] 0.2 0.3 0.45 1 1.4 4.3 at max. travel speed...

Open the catalog to page 8
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 9

Spindle axes EGC-BS-KF, with recirculating bail bearing guide Technical data Size 70 80 120 185 Diameter [mm] 12 15 25 40 Pitch [mm/rev.] 10 10 20 10 25 40 Size 70 80 120 185 Spindle pitch 10 10 20 10 25 40 Jo GK [kg mm2] 1.99 5.2 5.2 64.46 64.46 594 GV [kg mm2] 3.41 8.67 8.68 92 92 774.71 Js per metre stroke [kgmm2/m] 14.2 34.6 34.6 275.6 275.6 1803.1 JL per kg effective load [kgmm2/kg] 2.53 2.53 10.13 2.53 15.83 40.53 JW Additional slide GK [kg mm2] 1.04 1.86 7.46 6.09 38.06 348.87 GV [kg mm2] 1.48 2.34 9.35 7.34 45.85 399.08 The mass moment of inertia JA of the JA =JO + JW + JS xworking...

Open the catalog to page 9
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 10

Spindle axes EGC-BS-KF, with recirculating bail bearing guide Technical data Characteristic load values The indicated forces and torques refer to the slide surface. The point of application of force is the pointwhere thecentreof the guideand the longitudinal centre of the slide intersect. These values must not be exceeded during dynamic operation. Special attention must be paid to the cushioning phase. Ifthe axis is subjected to more than two ofthe indicated forces and torques simultaneously, the followingequation must be satisfied in addition to the indicated maximum loads: Calculatingthe...

Open the catalog to page 10
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 11

Spindle axes EGC-BS-KF, with recirculating bail bearing guide Technical data Calculating service life Theservice life of theguide dpends on the load. To provide a rough indication of the service life of the guide, the graph below plots the load These values are only theoretical. comparison factor fv against the Consultation with your local contact service life. person at Festo is mandatory for load comparison factors fv greater than 1.5. Load comparison factor fvas a function ofservice life Example: A userwants to move an X kg load. approx. 1,500 km. Reducingthe Using the formula 10 gives...

Open the catalog to page 11
Spindle axes EGC-BS-KF, with recirculating ball bearing guide - 12

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:12.00pt "Arial", sans-serif; } .font5 { font:13.00pt "Arial", sans-serif; } .font6 { font:19.00pt "Arial", sans-serif; } .font7 { font:20.00pt "Arial", sans-serif; } .font8 { font:23.00pt "Arial", sans-serif; } .font9 { font:35.00pt "Arial", sans-serif; } .font10 { font:98.00pt "Arial", sans-serif; } .font11 { font:11.00pt "Franklin Gothic...

Open the catalog to page 12

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs