video corpo cad

Linear drives SLG, flat design
28Pages

{{requestButtons}}

Catalog excerpts

Linear drives SLG, flat design - 1

Linear drives SLG, flat design

Open the catalog to page 1
Linear drives SLG, flat design - 2

Linear drives SLG, flat design Features General information Piston 0 8,12 and 18 Օ Strokelengthsof 100 ...900 mm Two cushioning types selectable: - Elastic cushioning -Shockabsorbers Օ Direct mounting via centeringholes Extremely flat design Օ Built-in precision guide Slide with polished surface Օ High load capacity Adjustable end stops Օ Versatile supply port options Suitable for multiple-axis applications with other mini slides The technology in dթtail 5 1 End stop Finely-adjustable end stops over entire stroke range 2 Guide rail Highlyaccurate, rigid precision guide unit: stainless...

Open the catalog to page 2
Linear drives SLG, flat design - 3

Linear drives SLG, flat design Features Intermediate positions - simple and Theintermediateposition module can be used for advancingto one or more intermediate positions Օ It is mounted parallel to the linear drive SLG via an additional mounting rail. This means that it can also be easily retrofitted. Fine adjustment of the intermedi-ate position is effected via a stop screw with lock nut inexpensive Օ With two modules the same position can be approached from either direction Theintermediatepositionscanbe freely selected across the entire stroke range (observe minimum distances) Օ The...

Open the catalog to page 3
Linear drives SLG, flat design - 4

Linear drives SLG, flat design Features System product for handling and assembly technology Type Brief description Page/Internet 11 Drives Diverse possible combinations in handling and assembly technology drive 12 Grippers Diverse variation options in handling and assembly technology gripper 3 Adapters For drive-drive and drive-gripper connections adapter kit 141 Basic components Profiles and profile connections basic component 151 Proximitysensors For position sensing proximitysensor 16 Multi-pin plugdistributor For bundlingindividual cables to form a multi-pin cable multi-pin...

Open the catalog to page 4
Linear drives SLG, flat design - 5

Linear drives SLG, flat design Peripherals overview 1 2 3 4 5 6 7 8 9 Type Brief description Page/Internet 1 Linear drive SLG Drive without accessories 7 2 Centeringpin ZBS For centering loads and attachments on the slide 25 131 Shock absorber retainer SLG-D For fasteningthe rubber buffers or shock absorbers in combination with the intermediate position 23 4 Rubber buffer SLG Non-adjustable, elastic cushioning. Used only at low speeds 25 5 Shock absorber YSRG Self-adjusting hydraulic shock absorber with return springand linear cushioning characteristic 25 6 Mounting rail SLG-S For...

Open the catalog to page 5
Linear drives SLG, flat design - 6

Linear drives SLG, flat design Type codes SLG 12 500 YSR A Z2 Type Piston 0 [mm] Stroke [mm] Cushioning P Elastic cushioning, non-adjustable YSR Linear shock absorber, self-adjusting Position sensing ^^^^^^^postio^snsng Intermediate position Z1 1 intermediate position Z2 2 intermediate positions Z3 3 intermediate positions Z4 4 intermediate positions 6 Internetrwww.festo.com/catalog/... Subjectto change-2011/06

Open the catalog to page 6
Linear drives SLG, flat design - 7

Linear drives SLG, flat design Technical data Function Piston 0 8 12 18 Stroke1' [mm] 100... 500 100 ... 700 100... 900 Pneumatic connection M3 M5 Mode of operation Double-acting Operating medium Filtered compressed air, lubricated or unlubricated Constructional design Rodless drive Cushioning -»10 Flexible cushioning rings/plates at both ends Self-adjustingat both ends Position sensing For proximity sensing Type of mounting Direct mounting Mounting position Any Driver principle Slotted cylinder, mechanically coupled Guide Guide rail with slide Max. speed [m/s] 1 1.5 1) Intermediate strokes...

Open the catalog to page 7
Linear drives SLG, flat design - 9

Linear drives SLG, flat design Technical data Characteristic load values The forces and torques specified refer to the centre of the guide rail. If the drive is subjected to several of the indicated forces and torques simultaneously, the following equations must be satisfied in addition to the indicated maximum loads: Fy Fz Mx My Mz < 1 Fymax. Fzmax. Mxmax. Mymax. Mz max. Piston 0 8 12 18 Fymax. [N] 255 565 930 Fzmax. [N] 255 565 930 Mxmax. [Nm] 1 3 7 Mymax. [Nm] 3.5 9 23 Mzmax. [Nm] 3.5 9 23 Torsional backlash [°] at the respective torques Piston 0 8 12 18 at Mxmax. ±0.03 ±0.04 ±0.05 at...

Open the catalog to page 9
Linear drives SLG, flat design - 10

Linear drives SLG, flat design Technical data As a function ofoperating pressure and end-position cushioningsystem A linear drive SLG withYSR cushioning (YSRG shock absorbers) must be used in applications requiringvery high repetition accuracy. CushioningP -------vmin. SLG-8 -------vmin.SLG-12 1 1 111 vmin.SLG-18 50 100 m[kg] 10 Internet: www.festo.com/cataIog/... Subject to change-2011/06

Open the catalog to page 10
Linear drives SLG, flat design - 11

Linear drives SLG, flat design Technical data Dtermination of required points of support as a function of applied load F Note U-- Thesupport spacings L must belaid out in such a way that the mounting profilefor theintermediateposition module will exhibit less deflection than the drive itself. Deflection around the X axis 1000 SLG-18 " SLG-12" SLG-8 I 鯮 ! w f=0.5 mm f=0.1 mm f = 0.05 mm 900 800 700 600 500 400 300 200 100 0 50 100 150 l [mm] 200 250 300 1000 900 800 700 600 500 400 300 200 100 0 round the Yaxis SLG-18 j ! ! " SLG- -12 ~~ i ; i j i ' ! 1 ! ] SLG-8 ■ i > i i i ■ i L _ r ■ i...

Open the catalog to page 11
Linear drives SLG, flat design - 13

Linear drives SLG, flat design Technical data Permissible spanner widths for the compressed airconnectors Front side Front side In gnral The following spanner widths can be SLG-8: =驣 5.5... 8 used on the external surface and SLG-12: = 5.5... 8 front side: SLG-18: =ã 8... 10 Restrictions on the front sides The threaded connectors protrude For this reason, the following SLG-8: 8 from the top or bottom of the profile spanner widths can only be used in SLG-12: 8 with compressed air connections at certain conditions: SLG-18: 10 both ends. The connector threads are too close to one another for...

Open the catalog to page 13
Linear drives SLG, flat design - 14

Linear drives SLG, flat design Technical data Dimensions SLG-8/-12/-18 Download CAD data www.festo.com Slide SLG-18 1 Supply port, external surface 2 Supply port, front side 3 Slot for proximitysensor SME-/SMT-10 4 Stop 5 Shock absorberYSR or rubber buffer (P cushioning) 14 Internet: www.festo.com/cataIog/... Subject to change-2011/06

Open the catalog to page 14
Linear drives SLG, flat design - 16

Linear drives SLG, flat design Technical data - Intermediate position module SLG-Z Function Piston 0 8 112 18 Pneumatic connection M3 Mode of operation Double-acting Operatingmedium Filtered compressed air, lubricated or unlubricated Constructional design Stop in the form of a semi-rotary device in accordance with the rackand pinion principle Fineadjustmentofthe [mm] 1.7 intermediate position Cushioning1' -»10 Position sensing Forproximitysensor Type of mounting Direct mounting Assembly position2' Any Min. swivel time [ms] 30 50 at 6 bar Max. frequency [1/s] 16 10 at 6 bar Max. permissible...

Open the catalog to page 16

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs