video corpo cad

Linear drives DGP/DGPL - metric series
69Pages

{{requestButtons}}

Catalog excerpts

Linear drives DGP/DGPL - metric series - 1

Linear drives DGP/DGPL

Open the catalog to page 1
Linear drives DGP/DGPL - metric series - 2

Linear drives DGP/DGPL Slection aid General information Compact, fitting length relative to stroke 镕 Highly adaptable, thanks towide choice ofmountingand attachmentoptions Adjustable end-position cushioningsystems Օ Can be combined with the modular system for handlingand assemblytechnology Maintenance-free (for up to 5000 km with a recirculating ball bearing guide) Օ Wide choice ofvariants: - Clamping unit - Extended slide - Air connections on both sides - Electronic cushioningwith SoftStopSPCll Basic design DGP Piston 018... 80 mm Օ Stroke lengths 10 ... 3000 mm As a drive for...

Open the catalog to page 2
Linear drives DGP/DGPL - metric series - 4

Linear drives DGP/DGPL Key features The technology in dtail 1 Adjustable end-position 3 cushioning, alternatively: -Shock absorber 4 - SoftStopSPCll 2 Slide is permanently attached to the driver Cover strip protects the drive against the ingress of dirt Choice of supply port positions, options on three sides on the end cap 5 6 Piston Mounting/sensor slot for integral proximity sensors, additional slot for slot nuts with piston 0 32 and above Stable profile 7 4 Internet: www.festo.com/catalog/... Subject to change-2011/02

Open the catalog to page 4
Linear drives DGP/DGPL - metric series - 5

Linear drives DGP/DGPL Key features System product for handling and assembly technology Brief description Page/Internet 11 Linear drives Wide range of combination options within handling and assembly technology drive 12 Grippers Wide range of combination options within handling and assembly technology gripper 3 Adapters For combining drives with drives and drives with grippers adapter kit 141 Basic components Profiles and profile connectors as well as profile/drive connectors basic component 151 Installation components For achievinga clear-cut, safe layout for electrical cables and tubing...

Open the catalog to page 5
Linear drives DGP/DGPL - metric series - 6

6 Internet: www.festo.com/catalog/... Subject to change-2011/02

Open the catalog to page 6
Linear drives DGP/DGPL - metric series - 7

Linear drives DGP Peripherals overview Type Brief description Page/Internet 11 Linear drive DGP Pneumatic linear drive with driver 8 12 Load inverter AK The driver should be mounted pointingdownwards with longstrokes > 2 m or in unfavourable environments. By usingthe load inverter it means that the load can be attached from above. 61 131 Moment compensator FK For compensating misalignments when using external guides 62 141 Slot cover B/S For protectingagainst dirt and securing proximity sensor cables 65 151 Proximity sensor G/H/I/J/N Forsensing the driverposition 67 |_6j Cable with socket V...

Open the catalog to page 7
Linear drives DGP/DGPL - metric series - 8

Linear drives DGP Type code DGP 25 500 PPV A B KV GK D2 Type DGP Linear drive Piston 0 Stroke [mm] Cushioning PPV Adjustable end-position cushioning Position sensing A Via magnet Gnration B Clamping unit KV Front KH Rear Basic design GK Standard driver GV Extended driver Supply port/accessories D2 Supplyportatbothends FK Moment compensator AK Load inverter 8 Internet: www.festo.com/catalog/... Subject to change-2011/02

Open the catalog to page 8
Linear drives DGP/DGPL - metric series - 9

Linear drives DGP Type code ZUB 2S2B F 2H 2V Accessories ZUB Accessories supplied loose Slot cover ...S Sensorslot ...B Mounting slot Slot nut ...Y For profile barrel Central support ...M Central support Foot mounting ...F Foot mounting Proximity sensor ...G With cable, 2.5 m ...H With plug ...I Contactless, with cable, 2.5 m ...J Contactless, plug ...N NC contact with cable, 2.5 m Cable with socket ...V 2.5 m 2011/02 -Subjectto change Internet: www.festo.com/catalog/... 9

Open the catalog to page 9
Linear drives DGP/DGPL - metric series - 10

Linear drives DGP Technical data Function www.festo.com/en/ Spare_parts_service -N- Diameter 18 ... 80 mm Stroke length 1 ... 3000 mm Wearing parts kits 20 -T- Piston 0 18 25 32 40 50 63 80 Constructional design Pneumatic linear drive with driver Protection against torsion/guide Slotted profile barrel Mode of operation Double-acting Driver principle Positive-locking (slot) Mounting position Any Pneumatic connection M5 GVi G% G/ Stroke length [mm] 10... 1800 10... 30001' Cushioning(PPV) Adjustable at both ends Cushioning length [mm] 16 18 20 30 83 Position sensing Via magnet 1) With...

Open the catalog to page 10
Linear drives DGP/DGPL - metric series - 11

Linear drives DGP Technical data Materials Sectionalview Axis 18 125 | 32 | 40 ho I63 |80 111 End cap Anodised aluminium 2 Profile Anodised aluminium 131 Cover strip Corrosion resistant steel | Polyurethane 141 Driver Anodised aluminium Seals Nitrile rubber, polyurethane 2011/02 - Subject to change Internet: www.festo.com/cataIog/... 11

Open the catalog to page 11
Linear drives DGP/DGPL - metric series - 12

Linear drives DGP Technical data Characteristic load values The indicated forces and torques refer to the centre line of the internai diameterofthe profile barrel. They must not be exceeded in the dynamic range. Special attention must be paid to the cushioning phase. If the drive is subjected to more than two of the indicated forces and torques simultaneously, the followingequations must be satisfied in addition to the indicated maximum loads: 0.4 x Fz + Mx + My FZmax. MXmax. Mymax. + 0.2 X Mz MZmax. <1 Fz Fzmax. < 1 Mz MZmax. < 1 Permissible forces and torques Piston 0 18 25 32 40 50 63 80...

Open the catalog to page 12
Linear drives DGP/DGPL - metric series - 13

Linear drives DGP Technical data Operating range of the integrated end-position cushioning PPV Maximum permissible speed vas a function of the movingload m Note The dataapplies to ahorizontal mounting position, applied load on top. m=Appliedload + moving load 10) The graph opposite refers to rmax. 0,01 0,02 0,05 0,1 02 03 0,5 0,81 2 3 5 8 10 20 30 50 80100 200300 500 800 m[kg] Pneumatic linear drives The end-position cushioningmustbe cushioned usingsuitable equipment adjusted to ensure jerk-free (shock absorbers, stops, etc), operation. If the operating conditions preferably at the centre...

Open the catalog to page 13
Linear drives DGP/DGPL - metric series - 14

Linear drives DGP fcthmtal ditJ Dimensions Standard drrverGK Piston 0 ie Profile harrei Downtoad CADData^ wwwfesto.comus/ud [2 Suppiy ports atone end. option of three sides of a n en d cap f 02variant: suppiy port at both ends, option of three side* per end cap) [2J Sensor slot hxproximitv sensof TJ Mtftinghtfeftyroot mounting rf> 0 Regulatingscrew*otadjustabie end-pOSitioncushioning cAusstrofcelengh ExttndaidrrverW u _ * 뮕 ~~1- 290* s DtusstroktlMIh Internet www festocofn/abtoiL' Subkctlochange-20tl/03

Open the catalog to page 14
Linear drives DGP/DGPL - metric series - 15

Linear drives DGP iKtiftkaldiU Dimensions Standard driver GJC PbtonO 2 S ^rofil barrel Download C/ Data www.festo.comi'us/cad H- 50* j] SuppIvponsatoneencL option of threesidesof an end cap «32 variant: supplyport ai both ends, optkMi of three sid^sper end cap) 7] S&isor slot for proximiTy sensor j] Mountingholefof lool moontingHP 3 tefrlat绯r^sciwfof adiuitable end dosit io n eu shton in t ptusstrofcelenfth Extended drw GV PfttonG 2 S plus stroke leneth -s : 209 ■ ■ 4 90* - 3C0.1 roii.'OJ-Suaiedtodwitt Internet: www festacom/cjulog,1

Open the catalog to page 15

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs