video corpo cad

DSBC
58Pages

{{requestButtons}}

Catalog excerpts

DSBC - 1

Standard cylinders DSBC, to ISO 15552

Open the catalog to page 1
DSBC - 2

Standard cylinders DSBC, to ISO 15552 Key features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA  24  562, NF E 49 003.1 and UNI 10290) Double-acting For contactless position sensing Optionally with protection against rotation Extensive range of accessories makes it possible to install the cylinder virtually anywhere Three types of cushioning available: – P cushioning: elastic cushioning rings/pads at both ends – PPS cushioning: pneumatic cushioning, self-adjusting at both ends – PPV cushioning: pneumatic cushioning,...

Open the catalog to page 2
DSBC - 3

Standard cylinders DSBC, to ISO 15552 Key features DSBC-… D3 – Sensor slots on 3 sides The piston position can be sensed on three sides of the drive if the feature D3 is selected in the modular product system. 3 Sensor slot for proximity sensor Position sensing/force control With position transmitter SMAT-8M, SMAT-8E, SDAT With proportional pressure regulator VPPM Analogue positional feedback possible Analogue output – 0 … 10 V – 0 … 20 mA Optional accessories Mounting kit DAVM Infinite adjustment of the gripping force possible Setpoint input – 0 … 10 V – 4 … 20 mA è 53 For lateral valve...

Open the catalog to page 3
DSBC - 4

Standard cylinders DSBC, to ISO 15552 Key features Application examples Automatic screw machine

Open the catalog to page 4
DSBC - 5

Standard cylinders DSBC, to ISO 15552 Key features Variants from the modular product system Symbol Features Protection against rotation. For correctly oriented feeding Clamping unit Integrated clamping unit on the piston rod E1/E2/ With end-position locking E3 L Low friction Positive locking in the end position as a drop guard. If there is a drop in pres­ sure, the piston rod is secured in its end position to prevent it from dropping At high piston speeds, considerably greater efficiency than other versions. The special materials considerably reduce system wear. Low-friction move­ ments are...

Open the catalog to page 5
DSBC - 6

Standard cylinders DSBC, to ISO 15552 Product range overview Internet: www.festo.com/catalogue/.

Open the catalog to page 6
DSBC - 7

Standard cylinders DSBC, to ISO 15552 Product range overview Piston rod thread extension Wiper seal variant For unlubricated operation Wiper seal variant hard scraper (ring) Wiper seal variant increased chemical resistance High corrosion protection Position sensing DSBC-…-L/-U – With special running characteristics DSBC-…-L n – – DSBC-…-Q – With protection against rotation DSBC-…-Q n DSBC-…-C – With clamping unit, standard hole pattern DSBC-…-C n DSBC-…-E1/-E2/-E3 – With end-position locking, standard hole pattern DSBC-…-E1/ -E2/-E3 n – – –

Open the catalog to page 7
DSBC - 8

Standard cylinders DSBC, to ISO 15552 Type codes Type Double-acting DSBC Standard cylinder Protection against rotation – Q Without protection against rotation With protection against rotation Standard Low friction Uniform, slow movement Piston j [mm] Stroke [mm] Clamping unit – C None Attached None At both ends With piston rod in advanced position With piston rod in retracted position Piston rod thread type – F Male thread Female thread Sensor slot on 1 side Sensor slot on 3 sides Elastic cushioning rings/pads at both ends Pneumatic cushioning, self-adjusting at both ends Pneumatic...

Open the catalog to page 8
DSBC - 9

Standard cylinders DSBC, to ISO 15552 Type codes Standard High corrosion protection Standard Bellows on bearing cap Wiper seal variant – A1 A2 A3 None Increased chemical resistance Hard wiper seal For unlubricated operation Piston rod thread extension – …L

Open the catalog to page 9
DSBC - 10

Standard cylinders DSBC, to ISO 15552 Peripherals overview Mounting kit DAVM for valve assembly è 53 4 bA Mounting components and accessories Description Foot mounting HNC/CRHNC Flange mounting FNC/CRFNG Trunnion flange ZNCF/CRZNG Trunnion support LNZG/CRLNZG Swivel flange SNC For bearing or end caps – For bearing or end caps – Cannot be used on the bearing cap in combination with protective bellows kit DADB – For bearing or end caps – Cannot be used on the bearing cap in combination with protective bellows kit DADB – For end caps Cannot be mounted in combination with E1. Can only be...

Open the catalog to page 10
DSBC - 11

Standard cylinders DSBC, to ISO 15552 Peripherals overview Mounting attachments and accessories Description Clevis foot LSNG Clevis foot LSNSG Swivel flange SNCS Clevis foot LBG Swivel flange SNCL Swivel flange SNCB/SNCB-…-R3 Clevis foot LNG/CRLNG Clevis foot LSN Trunnion mounting kit DAMT Rod eye SGS/CRSGS Right-angle clevis foot LQG Rod clevis SGA Coupling piece KSG Coupling piece KSZ Rod clevis SG/CRSG Self-aligning rod coupler FK/CRFK Guide unit FENG Slot cover ABP-5-S Proximity sensor SME/SMT-8M One-way flow control valve GRLA Push-in fitting QS Protective bellows kit DADB...

Open the catalog to page 11
DSBC - 12

Standard cylinders DSBC, to ISO 15552 Technical data Function P cushioning -NPPV cushioning General technical data Piston  Elastic cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends Pneumatic cushioning, self-adjusting at both ends [mm] [mm] 17 19 22 17 19 15 Via proximity sensor Via internal thread / accessories Any Operating and environmental conditions Piston  Pneumatic connection DSBC-… DSBC-…-C Piston rod thread Stroke DSBC-… DSBC-…-Q DSBC-…-C DSBC-…-E1/-E2/-E3 DSBC-…-P2 DSBC-…-…E DSBC-…-…L Design Mode of operation Cushioning DSBC-…-P DSBC-…-PPV...

Open the catalog to page 12
DSBC - 13

Standard cylinders DSBC, to ISO 15552 Technical data Operating and environmental conditions Piston  Ambient temperature1) DSBC-… DSBC-…-L/-A1 DSBC-…-C DSBC-…-T1 DSBC-…-T3 DSBC-…-T4 DSBC-…-P2 DSBC-…-EX4 Corrosion resistance class CRC DSBC-… DSBC-…-R3 1) 2) Note operating range of proximity sensors. Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for...

Open the catalog to page 13

All Festo catalogs and technical brochures

  1. Silencers

    15 Pages

  2. Silencers U

    4 Pages

  3. Lubricators MS

    11 Pages

  4. Checkbox CHB

    23 Pages

  5. Air guns

    7 Pages

Archived catalogs