video corpo cad

Condensate drain WA/PWEA
8Pages

{{requestButtons}}

Catalog excerpts

Condensate drain WA/PWEA - 1

Condensate drains WA/PWEA

Open the catalog to page 1
Condensate drain WA/PWEA - 2

Condensate drains WA Technical data Function "A" Temprature range 0... +60°C Input pressure 0... 16 bar Note For attachment to service units and compressed air networks/systems. Condensate present in the compressed air is separated in suitable filters. The condensate that accumulates must be emptied from time to time, as otherwise itwould be drawninand could lead to faults in the downstream elements. The devices shown perform this task automatically. They contain a float which opens when a certain condensate level is achieved. The accumulated condensate is then emptied. With an additional,...

Open the catalog to page 2
Condensate drain WA/PWEA - 3

Condensate drains WA Technical data Materials Sectionalview Condensate drain WA-1-B WA-2 1 Housing Brass Brass 2 Float Polypropylene Polyacetate 3 Cover Polyamide Wrought aluminium alloy 4 Bowl - Polycarbonate - Seals Nitrile rubber Nitrile rubber Actuating force F for manual actuation as a function of supply pressure p WA-1-B WA-2 0 10 20 30 iO 50 60 70 80 90 100 Primary pressure pl = 7 bar Primary pressure pl = 7 bar WA-2 \ \ v \ 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 _Q[l/min]_ Primarypressure pl = 7 bar 2011/06 - Subject to change Internet: www.festo.com/cataIog/... 3

Open the catalog to page 3
Condensate drain WA/PWEA - 4

Condensate drains WA Technical data Dimensions WA-1-B WA-2 Download CAD data www.festo.com 042 038 1 Adapter SW17 2 Barbed fitting for plastic tubing type PCN-4 3 Manual override facility Ordering data Part No. Type 158497 WA-1-B 152810 WA-2 4 Internet: www.festo.com/cataIog/... Subject to change-2011/06

Open the catalog to page 4
Condensate drain WA/PWEA - 5

Condensate drains PWEA Technical data Function Temprature range Condensate passes through the port in the bottom of the filter bowl into the attached condensate drain valve, where it is collected in a reservoir. A capacitive sensor detects once the maximum fillinglevel is reached. Thecondensateescapesintothe atmosphere via the opening diaphragm valve through the discharge line. The diaphragm valve closes again after a specified response time. A residual amount of condensate remains in the reservoir so that no compressed air can escape into the discharge line. Fully automatic condensate...

Open the catalog to page 5
Condensate drain WA/PWEA - 6

Condensate drains PWEA Technical data Operating and environmental conditions Operating pressure [bar] 0.8... 16.0 Operating medium Compressed air Ambienttemperature [°C] +1 ... +60 Temperature of medium [°C] +1 ... +60 Storage temperature [°C] +10... +60 Corrosion resistance class CRC1' 2 1) Corrosion rsistance class 2 according to Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricatingagents....

Open the catalog to page 6
Condensate drain WA/PWEA - 7

Product Range and Company Overview A Complte Suite of Automation Services Our experienced engineers provide complte support at every stage of your development process, including: conceptualization, analysis, engineering, design, assembly, documentation, validation, and production. Custom Automation Components Custom Control Cabinets Complete Systems Complete custom engineered solutions Comprehensive engineering support Shipment, stocking and storage services and on-site services The Broadest Range of Automation Components With a comprehensive line of more than 30,000 automation components,...

Open the catalog to page 7
Condensate drain WA/PWEA - 8

Festo North America Festo Rgional Contact Center 5300 Explorer Drive Mississauga, Ontario L4W 5G4 Canada USA Customers: For ordering assistance, Call: 1.800.99.FESTO (1.800.993.3786) Fax: 1.800.96.FESTO (1.800.963.3786) Email: customer.service@us.festo.com For technical support, Call: 1.866.GO.FESTO (1.866.463.3786) Fax: 1.800.96.FESTO (1.800.963.3786) Email: product.support@us.festo.com Canadian Customers: Call: 1.877.GO.FESTO (1.877.463.3786) Fax: 1.877.FX.FESTO (1.877.393.3786) Email: festo.canada@ca.festo.com United States USA Headquarters, East: Festo Corp., 395 Moreland Road,...

Open the catalog to page 8

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs