Angled gripper DHWC The cost-effective alternative Highlights • Economical thanks to optimal price/performance ratio • High repetition accuracy and high torque • Long-life with integrated guide • C- and T-slots for a wide range of sensors • Reduced copper, zinc and nickel content for use in battery production The compact and light angled gripper DHWC is ideal for use in the electronics and small parts industry and also for battery production thanks to its reduced copper, zinc and nickel content. And it is cost-effective too, helping you to manage your production costs. Reliable The durable design and the rigidity of the gripper fingers ensures the DHWC has a long service life, without it losing any of its very high repetition accuracy. The opening angle is up to 180°, the side supporting frame of the gripper jaws enables a high torque load. The DHWC is available in single-acting or double-acting versions and in many different sizes. A wide range of connection options makes mounting very easy. Gripping force retention is optionally available. Efficient and sustainable Our experts had several objectives in mind when they developed the DHWC: an attractive price, low weight and designed to save as much space as possible. The low content of copper, zinc and nickel also makes it suitable for battery production. Last but not least, the reduced material usage, the long service life and the low air consumption also make it extremely sustainable.

Angled gripper DHWC Product overview Opening angle up to 30° (15° per gripper jaw) Available for both T- and C-slot versions Compact, light and expandable with centre holes Reduced copper, zinc and nickel content for use in battery production From below Sideways with through-hole Replaceable gripper fingers Technical data Size Double-acting, single-acting, open Opening angle Rotational symmetry Position sensing Direct mounting via through-hole or thread – With through-hole and dowel pin, with female thread and dowel pin 0,1 ... 0,8 14,5 ... 116 Ambient temperature Total gripping torque at 6 bar...