video corpo cad

Adsorption dryers PDAD, NPT
12Pages

{{requestButtons}}

Catalog excerpts

Adsorption dryers PDAD, NPT - 2

-o- New 464.Adsorption dryers PDAD Key features festd Description Cold-regeneratingadsorption dryer with defined pressure dew point and high flow rate for decentralised compressed air drying The utilisation of adsorption dryers is always required when pressure dew points of less than -20 °C need to be achieved reliably. Areas of application Sensors Օ Semiconductor manufacturing Manufacture of foils and packaging Օ Transportation ofpowder Dental technology Օ Paintingsystems Food industry Օ Pharmaceuticals Features/Advantages/Benefits The solution for dry and clean compressed air...

Open the catalog to page 2
Adsorption dryers PDAD, NPT - 3

-o- New 465.Adsorption dryers PDAD festo Peripherals overviewand type codes Peripherals overview Page/Internet 11 Wall mounting kit 8 ABMW 12 Foot mounting 8 ABMF - Service kit 9 PDAD-SP - Air nozzle 9 ADNA Type codes PDAD 22 Basic function PDAD Adsorption dryer Output flow rate under nominal conditions (supply pressure 7 bar, pressure dew point -40 °C, temperate of medium at input 25 °C) 09 87 l/min 13 126 l/min 22 212 l/min 51 506 l/min 73 729 l/min 100 994 l/min Pneumatic connection PDAD-09/13/22/51 Ny Thread NPTy-18 PDAD-73/100 NV2 Thread NPTV2-14 2010/02 - Subject to change Internet:...

Open the catalog to page 3
Adsorption dryers PDAD, NPT - 4

-o- New Adsorption dryers PDAD Technical data festd Function i Flow rate 40... 2,400 l/min Q Temprature range +2 ...+50°C Supply pressure 4... 16 bar Pressure dew point -40 °C or-70°C General technical data Type PDAD-09 PDAD-13 PDAD-22 PDAD-51 PDAD-73 PDAD-100 Pneumatic connection 1, 2 NPT3/8-18 NPTV2-14 Design Cold regeneratingadsorption dryer Type of mounting With accessories Mounting position Upright Horizontal Pressure dew point [°C] -40 -70 (with reduced flow rate) Air purity class at the outlet 2.1.1 in accordance with DIN ISO 8573-1 at a pressure dew point of-70 °C 2.2.1 in...

Open the catalog to page 4
Adsorption dryers PDAD, NPT - 5

-o- New Adsorption dryers PDAD Technical data festd Note Note Please do not use the average consumption values (flow rate) as your guide when setting up the dryer, instead use a) the inlet pressure of the dryer, b) the peak value for the flow rate and c) the maximum permissible supplytemperature. The adsorption dryers are designed for continuous operation. Intenselypulsed or intermittent operation leads to the premature agingof and/or damage to the dryingagent and thus to the failure ofthe dryer. Ifthe adsorption dryer PDADis nonetheless to be used in pulsed or intermittent mode the use...

Open the catalog to page 5
Adsorption dryers PDAD, NPT - 7

-o- New Adsorption dryers PDAD festo Technical data Dimensions With prefilter and Connecting kit B1» Download CAD data www.festo.com H Note Tube from condensate drain ofthe prefilter to the dryer isincluded in the scope of delivery. Thecondensatedrainportonthe dryerwith QSL-F push-in fittingis designed for tubingwith a diameter of 4 mm (standard O.D. tubing). B1 D1 O -20 1 Blankingplugs 2 NPTadapter Flow direction Type D1 B1 B1* B2 H1 H2 H3 PDAD-09 NPT%-18 92 - 19.5 491 240 445 PDAD-13 NPT%-18 92 - 19.5 550 240 504 PDAD-22 NPT%-18 92 - 19.5 681 240 635 PDAD-51 NPT3/8-18 92 - 19.5 1,111 240...

Open the catalog to page 7
Adsorption dryers PDAD, NPT - 8

-o- New 470.Adsorption dryers PDAD Accessories festd 471.Wall mounting kit ABMW i e 350 380 Dimensions and ordering data PDAD-09 PDAD-13 PDAD-22 PDAD-51 PDAD-73 PDAD-100 CRC1' Part No. Type B1 H1 B1 H1 B1 H1 B1 H1 B1 H1 B1 H1 92 401 92 460 92 591 92 1,021 92 1,416 184 1,021 553756 ABMW-PDAD 1) Corrosion rsistance class 2 to Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily dcorative surface requirements which are in direct contact with a normal industrial environment or m驩dia such as coolants or lubricating agents. 472.Foot...

Open the catalog to page 8
Adsorption dryers PDAD, NPT - 9

-o- New 473.Adsorption dryers PDAD Accessories festd 474.Service kit PDAD-SP with 2 dryingagent cartridges (4 drying agent cartridges in service kit PDAD-100-SP-...), sealing rings, plastic discs and a reset disc Operating and environmental conditions Operating pressure [bar] 4...16 Operating medium Filtered compressed air, unlubricated, grade of filtration 0.01 uni Ambienttemperature [°C] +5 +50 Temperature of medium [°C] +2 ...+50 For type Part No. Type PDAD-09 553749 PDAD-09-SP-12000 PDAD-13 553750 PDAD-13-SP-12000 PDAD-22 553751 PDAD-22-SP-12000 PDAD-51 553752 PDAD-51-SP-12000 PDAD-73...

Open the catalog to page 9
Adsorption dryers PDAD, NPT - 10

-o- New 476.Adsorption dryers PDAD festd Accessories 477-Wlicro-filter cartridge MS6-LFM-A For prefilter Grade offiltration: 0.01 pm For type Part No. Type PDAD-09/13/22/51 532909 MS6-LFM-A PDAD-73/100 552093 MS6-LFM-A-HF 10 Internet: www.festo.com/cataIogue/... Subject to change-2010/02

Open the catalog to page 10
Adsorption dryers PDAD, NPT - 12

Festo North America Festo Rgional Contact Center 5300 Explorer Drive Mississauga, Ontario L4W 5G4 Canada USA Customers: For ordering assistance, Call: 1.800.99.FESTO (1.800.993.3786) Fax: 1.800.96.FESTO (1.800.963.3786) Email: customer.service@us.festo.com For technical support, Call: 1.866.GO.FESTO (1.866.463.3786) Fax: 1.800.96.FESTO (1.800.963.3786) Email: product.support@us.festo.com Canadian Customers: Call: 1.877.GO.FESTO (1.877.463.3786) Fax: 1.877.FX.FESTO (1.877.393.3786) Email: festo.canada@ca.festo.com United States USA Headquarters, East: Festo Corp., 395 Moreland Road,...

Open the catalog to page 12

All Festo catalogs and technical brochures

  1. DSBC

    58 Pages

  2. Silencers

    15 Pages

  3. Silencers U

    4 Pages

  4. Lubricators MS

    11 Pages

  5. Checkbox CHB

    23 Pages

  6. Air guns

    7 Pages

Archived catalogs