Aboveground single wall tanks
2Pages

ABOVEGROUND SINGLE WALL TANKS Destination - Irrigation plants, fire protection plants, drinking water storage, storage of fertilizers and chemical products for the agricultural sector Quality and safety The latest technologies for the production of tanks based on years of experience and qualifications of the staff engaged in the production process from the engineering department, through logistics, quality control and production, ensure the finest quality of tanks and the safely of storing harmful and hazardous substances for humans and environment. The technical documentation of tanks, production processes and the final acceptance of tanks are agreed, accepted and approved by the Office of Technical Inspection (UDT) as well as other notified bodies. Our tanks hold certificates of approval issued by offices like the Chief Office for Measurements (GUM) to ensure that they comply with the applicable requirements of metrology standards. Technical characteristics: - Made in accordance with EN 12285-2, DIN 6616 or WUDT/UC/2003 - Material - certified carbon steel S235JR - Preparation of the external surface of tank sheets, grit blasting with the cleanliness degree of Sa 2.5 according to PN-ISO 8501-1 - Standard external coating with epoxy coatings of class C3 according to PN-EN ISO 12944-2 - Tanks can be provided with the additional internal surface security by using special paints resistant to substances stored in the tank - Depending on the option, tanks are adapted to wet, dry, vacuum and excessive interstitial space control method. Standard equipment of tank: - DN600 manhole cover with a gasket - DN50 or DN40 suction hose with a foot valve - Deluge pipe with a flow hydraulic trap and a certified pressure overfill prevention valve - Manual and electronic measuring points - Leak detection system - Protection valves - Ladder, railing, landing - Lifting lugs - Eyebolts on concrete footing to connect a tank to the ground.

The range of tank diameters From 1 m to 4 m The range of tank capacity From 1 m3 to 220 m3 The number and capacity of chambers depending on technical possibilities From 1 to 8 chambers EKONSTAL Sp. Z o.o. Sp. K, Ul Sloneczna 30 88-230 Piotrkow Kujawski tel ./fax +48 54 265 49 11 www.ekonstal.pl e-mail: ekonstal@ekonstal.pl EXCLUSIVE DISTRIBUTOR Ferrero S.p.A. Strada Pancalieri, 1 12030 CASALGRASSO (CN) - ITALIA Tel. +39 011 975 777 - Fax +39 011 975 194 tanks@ferrerocontainers.com www.ferrerocontainers.com