*mydirectindustry

Camshaft Gear

Product catalog summary

Overview: This document outlines the technical specifications and operational details for crane production mechanisms, focusing on hoisting winches, swing, and hoisting gear. It covers monitoring systems, camshaft gears, and position transmitters.

Specifications:

Protective casing with IP 65 to IP 68 protection levels.
Camshaft can hold up to 10 cam plates.
Switching angle adjustable from 10° to 350°.
Contact materials include silver for general control and gold for electronic circuits.

Monitoring Systems:

Optional remote indicating devices available in both analog and digital formats.
Angular position transmitters output signals as current or voltage variations.
Digital signals can be incrementally or absolutely coded, compatible with CAN-bus or SSI-Interface.

Camshaft Gears:

Features backlash compensated or reduced backlash gears.
Switching angle and point position adjustable via a worm drive.

Transmitter Details:

Potentiometric transmitters output current or voltage signals.
Incremental position transducers are directly coupled to drive shafts, used for measuring rope length.
Absolute coded transmitters use Gray code with resolutions of 13 or 14 bits.

Electrical Specifications:

Switching voltage: maximum 380 VAC, 34 VDC.
Switching current: maximum 10 A, 3 A.
Temperature range: -30°C to +70°C.

Additional Features:

Casing made of cast aluminum, grey varnished.
Electrical connections via cable gland or plug-type connection.
Stainless steel driving shaft with two ball bearings.

Catalog excerpts

with break-before-make contact sets having analog or digital remote indicator systems Construction ŅDesign varieties Camshaft gears > Incremental position transducerSwitch 1 to switch 10 Transducer with digital or analog output Transducer with digital or analog output Gear 1 Gear 2 2431 81097 mA AB are mainly used for end-point monitoring on driving-mecha-nisms in crane production, e.g. hoisting winches, swing and hoisting gear.If the length or angle to be monitored shall additionally be output as a continuous electrical signal, a > 2 12 2 mounting arrangement of a remote indicating device of...

Open the catalog to page 2

Casing materialDegree of protectionElectrical connectionDriving shaftShaft bearingGearwheelsTemperature rangecast aluminium, grey varnished RAL 7032IP 65, IP 68 on requestCable gland with internal terminal block or plug-type connection on requeststainless steeltwo ball bearings brass, ball bearings Ŗ30C up to +70аCGear 1 (basic gear)RatioGear 2 (supplementary gear)reduced backlashbacklash compensated (zero backlash)backlash compensated speed increasing ratioon requestSwitching angle and switchingpoint position adjustable via a worm drive by means of a screwdriver 1:1 to 1296:11:1 to 216:1 (spring...

Open the catalog to page 3

Camshaft Gear

Camshaft Gear

Catalog excerpts

All Fernsteuergeräte catalogs and technical brochures