Catalogs >
FEPA Srl >
HDC MGO HI WATT BAND HEATERS

HDC MGO HI WATT BAND HEATERS
1Pages

Catalog excerpts

HDC BANDHEATERS HIGH WATTDENSITY MgO INSULATED HDC lments are the state of the art of heating in case of band heaters. Their main features are : - very high watt densrty up lo 30W/cm?for larger diameters - very small thermal inertia which means ENERGY SAVINGS - specially treated stainless steel sheath, allowing very high working temp驩rature up to 750^ Measured on the heater body. - thin cross section (only 5mm thick) - very long life since raw materials spcial treatment and perfect compactation - standard leads are fiberglass insulated - Maximum working temprature 40CC Typical applications : Injection nozzles, injection machines, extrusion machines, hot runner nozzles Connections : - box for axial / tangential exrt - radial exit with m驩tal conduit -threaded terminais Standard Leads Length : 1000 mm Standard Supply Voltage : 230V TECHNICAL FEATURES POWER tolrance [WATT] +/- 10% MAXIMUM WATT DENSITY LARGER/SMALLER HEATERS 30W/cm? / 15W/cm* RESISTANCE tolrance [il] +1-10% DIELECTRIC STRENGTH 1500 V INSULATION RESISTANCE >200M12/1000V UEAKAGE CURRENT <0.1 mA MAXIMUM WORKING TEMPERATURE MEASURED ON SHEATH 750C REV.O dated 15/05/11 doc. 7.2.10

Open the catalog to page 1