EcoTrans MULTISAFE® The solution for your applications
Open the catalog to page 1EcoTrans MULTISAFE® Pump The universal solution for low pressures up to 16 bar
Open the catalog to page 2Area of application The EcoTrans MULTISAFE® pump is used for the transport of abrasive, aggressive, highly viscous or toxic fluids and, especially, for metering and feeding of filter presses, reactors and spray driers. Flow range The EcoTrans MULTISAFE® is designed for a flow rate of 2 to 20 m³/h and achieves operating pressures of up to 16 bar, thus providing a genuine alternative to the pumps that hitherto have been used in low-pressure applications. Fig. 1: A = EcoTrans MULTISAFE® 5 B = EcoTrans MULTISAFE® 10 C = EcoTrans MULTISAFE® 20 Innovative The EcoTrans series of pumps already complies...
Open the catalog to page 3Efficient FELUWA hose-diaphragm piston pumps achieve a hydraulic efficiency of up to 98 %, the highest of all pump technologies. The EcoTrans MULTISAFE® combines high efficiency with low energy consumption. Maximum availability and low maintenance costs The high degree of volumetric efficiency and low energy consumption as well as the long service life of the wear parts reduce the operating and maintenance costs to a minimum. With a service life of more than 20,000 operating hours, the hose-diaphragms are not a typical wear part. In consequence, the cost of spare parts only amounts to approx....
Open the catalog to page 4FELUWA DownFlow Technology (DFT) For the purpose of transporting fluids containing solids with a tendency to sedimentation, FELUWA literally turns the traditional pumping principle upside down. In this case, the fluid is transported from the top downwards, thus using gravity to aid transport. This is a reliable method for avoiding sedimentation and any associated failure of the entire pump (fig. 8). In-built piston compressor In order to reduce fluctuations in terms of pressure and flow, the EcoTrans MULTISAFE® pump has been designed as a modular system allowing the piston rod – which is guided...
Open the catalog to page 5FELUWA Pumpen GmbH Beulertweg 10 | 54570 Mürlenbach | Germany Phone +49 (0) 6594.10-0 | Fax +49 (0) 6594.10-200 [email protected] | www.feluwa.com Engineered and Made in Germany Your local representative:
Open the catalog to page 6