Electrical supply rail

Contents Presentation

Presentation The electrical supply rail Mobilis Inno meets the requirements of the most demanding manufacturers, installers, and end-users of mobile equipment: safety, compact, fast assembling, operation reliability, and easy maintenance of this electrical supply rail for travelling cranes and other mobile equipment requiring mobile power socket. EXCELLENT SAFETY AND OPERATOR PROTECTION: The closed profile of the mounted line with the full set of accessories has a protection level of IP23, which means that the equipment is protected so that people cannot access the dangerous sections, even under...

BENEFITS : New range inspired from MOBILIS ELITE: Safety High rank of design and performance Easier to install, to use and to maintain Design and brand color respected (clear grey profile, yellow accessories) Economicaly optimized Self-supporting PVC Profile with optimized cellular structures, closed, design and compact, for a minimal weight (Mobilis was the first to introduce the cellular PVC profiles on the market. The INNO profile is 35% more compact than the ELITE) Floating conductors fitted inside the profile to take into account the expansion differences of line’s synthetic material....

Technical data 1. USE The electrical supply rails with mobile socket Mobilis INNO are generally used for the electrification of Systems with straight trajectory like travelling cranes, cranes and hoists, narrow-aisle stores, work station equipment (tasksaver systems), elements of electric hoisting equipment and other diverse applications, inside and outside. 2. GENERAL TECHNICAL DATA: Rated operational intensity: The MOBILIS INNO lines are available in rated intensities 40A and 60A. The real current capacity depends on the operating factors and the ambient temperature. Number of poles: 4 poles...

6. INSULATION DISTANCES: Insulation distance between conductors or between conductors and accessible parts: - Distance in the air: 10 mm min, adapted to overvoltage category No. III ie 6kV according to EN61439-1. - Creepage distance: 30 mm min. (according to EN60204-32) 7. FLAME RESISTANCE: All materials used to build Mobilis INNO lines are self-extinguishing; they pass successfully glowing/hot line tests under 960°C for elements in contact with live parts and V-0 according to UL-94. 8. SAFETY PINS Line: identification of ground conductor: The ground conductor (PE) is marked on the whole line’s...

Intensive running: See the maximum intensity for a 100% duty cycle in the next paragraph. 12. INTENSITY ACCORDING TO DUTY CYCLE: 13. PROTECTION AGAINST SHORT-CIRCUITS: For intensities 40A and 60A, Icw<10kA. 14. LIGNE CALCULATION This paragraph gives a diagram to calculate the intensity required for your application: select your line’s length and check that for each rating, the rated current required by your motor is supported by the line. VOLTAGE DROP ACCORDING TO THE POSITION OF FEED BOXES A judicious arrangement of the supply points makes it possible to reduce the voltage drop. Positioning...

Example: an in-line feed box halves the length Lt of the section to be considered on the diagram. In this case, a 60A line of 160m with a feed box in the middle accepts a current of 60A with a voltage drop of less than 3%. One feed box at the end of the line Three feed boxes One feed box on line Four feed boxes Two feed boxes

1) General points Any intervention must be carried out offline only. Maintenance primarily concerns the conductors and the trolleys. Any damage to the conductors will reduce the operating life of the brushes. This damage may take different forms: - Oxidation due to a chemical environment - Abrasive dust - Damage due to electrical arcs in the case of a faulty contact following oxidation, heavy soiling or use of worn brushes. Regular inspection is required to check the wear of the brushes, casters of wheels and the quality of the conductive tracks according to the rate of use, the distance covered,...

1-Standard straight element Modular straight element of predefined length with 4 integrated copper conductors Advantages Ends ready to receive their connections. Compact and rigid. Description Modular element which ensures the transmission of the current and the guidance of the collector trolleys. Green-yellow protective conductor identification strip over the entire length. Product number and compatibilities The standard straight elements are available with varying lengths of 4m, 3m, 2m, 1m and special length. The intensities indicated are valid for 50Hz, 60Hz and D.C. Technical data Standard...

Material Self-extinguishing and lead-free PVC color light grey, copper Mounting Installation rules After installing the suspension parts, clip the straight elements one behind the other in the sliding suspensions, keeping a distance of 0.35m between the first suspension and the end of the first element. Connect the ends of the conductors by using the independent connections (reference: MI1000). Mounting rules 1. Insert the lines in the sliding hangers, 2. Connect the lines Mounting and dismounting required tools

2-Ventilation element Limits condensation in a line with a warm section (interior) and a cold section (exterior) of a building. Advantages Limits condensation Available in 2 lengths Description The purpose of the ventilation element is to limit condensation in a line with a warm section (inside the factory) and a cold section (outside the factory). In case of high humidity (working process using water, presence of animals, etc.) prefer Mobilis Elite with the possibility of rubber gasket. Product number and compatibilities Technical data Overall dimensions

Mounting Installation rules The ventilation element is to be fitted like a standard element at the exit of the building (at the start of the cold area). The edge of the PVC cap must stand in the cold area at a distance of 200 to 500 mm from the warm area. Provide 2 sliding hangers, with a center axis distance of 500mm for a 1m element, and of 2m for a 4m element. Mounting rules Same as the right element 1. Insert the ventilation element into the suspensions, 2. Connect the ventilation. Mounting and dismounting required tools