PRODUCT PORTFOLIO CONTACT PROBES FOR RADIO FREQUENCY MEASUREMENTS

OVERVIEW OF CONNECTORS GSC-Male H-MTD -Male MATE-AX -Male Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Design of RF-Probes Spring contact probes for RF-applications are coaxial probes. The inner and outer conductors are designed and dimensioned according the RF specific requirements. That means the signals within a wide frequency band are transmitted with a minimum loss. For evaluation of RF-probes various definitions and parameters are relevant. Two-Port Network The common two-port network describes the characteristics of possible transmission paths. These can be wires, radio transmissions or RF-contact probes. S-Parameters In radio frequency technology...

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS FEINMETALL offers sophisticated contact solutions for various industries and applications. Coaxial probes cover a wide range of radio frequency applications like contacting standard RF connectors, switch connectors or RF test points on the PCB. PCB test points For RF contacts directly on the PCB special RF probes are available. The probe design of these probes (e.g. HF05, HF60) is adapted to the typical requirements of the test points. SMD mini coax and SMD switch connectors be used on PCBs as RF interfaces. To contact these FEINMETALL provides...

MOUNTING OF THE NEW RF PROBES Mounting Options For the new RF probe series HF66 and HF05 different mounting options are possible. Mounting example HF66 RF probe without flange, with plug-in connection for Mini SMP female Some probes can be threaded directly into the mounting plate. Some versions have a flange that is screwed to the mounting plate, this version allows a simple adjusting and contacting of the DUT. The drill hole for mounting needs to have a sufficient diameter to allow a movement of the probe. For mounting RF probes with flange drill holes for the centering pins, threaded holes...

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Order number By combining the connection elements H819AE2 and H819AE1 a defined and reproducible measuring setup with fix parameters can be realized. Connection on both sides: D4K- Dacar 535, socket 4-pole, straight Length: 500 mm (± 10 mm) Connection units selectable for direct soldering HF19 Data sheet Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Coax cable 3GHz 700 mm MCX-M straight Connection element with pre-assembled coaxial cable RG 316. Impedance: 50 Ohm Cutoff frequency: recommended up to 3 GHz Standard length: 700 mm SMA-M straight Connector with pre-assembled coaxial cable Multiflex 86. Impedance: 50 Ohm Cutoff frequency: recommended up to 10 GHz Standard length: 700 mm BNC--M straight Coax cable 10GHz 700 mm SMA-M straight SMA-M straight SMA-M straight Connector with pre-assembled highly flexible coaxial cable. Impedance: 50 Ohm Cutoff frequency: recommended up to 6 GHz mSMP-F...

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Connection Order number Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com Data sheet

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Connection Order number Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com Data sheet

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Connection Order number Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com Data sheet

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Connection Order number Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com Data sheet

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS H-MTD Male Frequency Mounting Connection Order number NEW with flange with flange with flange Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Connection Order number Data sheet with flange with flange with flange Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Order number with flange with flange with flange with flange with flange with flange with flange Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com Data sheet

COAXIAL PROBES FOR RADIO FREQUENCY MEASUREMENTS Frequency Mounting Order number with flange with flange with flange with flange with flange Edition 02/2021. All rights reserved. Further versions can be found at www.feinmetall.com Data sheet

CONTACTS FOR COMMON CONNECTOR TYPES Long-life test connectors for in-circuit, functional and wire harness testing The need for contacting common USB, RJ or HDMI connector types is not only increasing in the in-circuit and functional test of printed circuit boards, but is also becoming more and more important in the wire harness test. Advantages when using FEINMETALL test connectors • Very high contact cycles; up to 200,000 (depending on test specimen) Test connectors do not snap into the DUT compared to normal plugs Unnecessary loading or damage to the contact springs in the test piece is avoided...

CONTACTS FOR COMMON CONNECTOR TYPES TC-P 195 005 USB 2.0 B micro Order code: 2112145 Max. data rate: 480 Mbit/s Contact cyles: 200.000 Current: 1,5 A at 25°C Number Poles: 5 TC-P 198 005 USB 2.0 B mini Order code: 2112757 Max. data rate: 480 Mbit/s Contact cyles: 200.000 Current: 1,0 A at 25°C Number Poles: 5 TC-P 198 004 USB 2.0 A Order code: 2112143 Max. data rate: 480 Mbit/s Contact cyles: 200.000 Current: 1,5 A at 25°C Number Poles: 4 TC-P 198 009 USB 3.0 A Order code: 2112159 Max. data rate: 4 Gbit/s Contact cyles: 50.000 Current: 1,5 A at 25°C Number Poles: 9 TC-P 756 024 USB 3.1 C Order...