ELECTRONIC TESTING
9Pages

{{requestButtons}}

Catalog excerpts

ELECTRONIC TESTING - 1

ELECTRONIC TESTING Sophisticated probes for every application

Open the catalog to page 1
ELECTRONIC TESTING - 2

PCB TEST Probes for in-circuit- and functional test For the in-circuit and functional test of PCBs basic probes in the centers 50 mil, 75 mil and 100 mil are most commonly used. In these applications long lifetime, reliable contacts and great variety of tip styles and spring forces are essential. Additionally, for many applications special solutions are required like e.g. for contacting lead-free soldered pads as well as contaminated, oxidized or OSP-coated boards. Basic probes for ICT/FCT For the in-circuit and functional test of PCBs, basic probes with a pitch of 50 mil, 75 mil and 100...

Open the catalog to page 2
ELECTRONIC TESTING - 3

PROGRESSIVE SERIES PROBES FOR DEFINED TEST SYSTEMS Challenging conditions, smart solution The interface between the test fixture and the test system is usually implemented realized by interface contacts, which are specially standardized for each test system. FEINMETALL offers probes for all common test systems like Spea, Agilent, Teradyne, ATG, Digitaltest, Luther & Mälzer, Factron etc... . In addition, we offer a wide range of standardized interface blocks, but also customized interfaces. With the PROGRESSIVE SERIES, FEINMETALL has solved the contacting problems during the in-circuit and...

Open the catalog to page 3
ELECTRONIC TESTING - 4

FOR CUSTOMIZED OR DEFINED TEST SYSTEMS FLYING PROBES FOR PCB TEST Flying probes for defined test systems like Spea, Seica, Scorpion or customized The innovative „flying probe concept“ enables ultra-precise measurements in just a few microseconds. Contacting can be made on one or both sides from above and below. Flying probes contact on the smallest geometries such as pins of micro-SMD components or rest rings of vias. Flying probe testers can be flexibly programmed to test different PCB layouts on one tester - without modification. The low and constant internal resistance during the whole...

Open the catalog to page 4
ELECTRONIC TESTING - 5

SOLAR PROBES FEINMETALL as a reliable partner for contacting solar wafers FEINMETALL is one of the leading suppliers of solar probes. With our innovative technologies and knowhow, we have developed special test probes for testing solar wafer. For the contacting of busbars (conductor paths) on the solar wafer, optimized probes are used to contact the sensitive bus bars without damage. Due to the special design and the very long lifetime of more than 4 million cycles of the contact probes, high-volume solar cell testing is made possible in a cost-efficient way. Benefits of solar probes • • •...

Open the catalog to page 5
ELECTRONIC TESTING - 6

AUTOMOTIVE APPLICATIONS RADIO FREQUENCY PROBES H-MTD® H-MTD® is a new, differential connector for the transmission of frequencies above 20Ghz. The main applications are functions of autonomous driving and assistance systems. FEINMETALL offers innovative test solutions that meet the requirements of the USB 3.2 standard and beyond. MateNET Differential connectors are becoming increasingly important in automotive applications. FEINMETALL offers established solutions for all common connectors. For contacting differential MateNET connectors FEINMETALL offers contact pins which are suitable even...

Open the catalog to page 6
ELECTRONIC TESTING - 7

CONSUMER ELECTRONIC RADIO FREQUENCY PROBES Probes for mini-coax and switch-connectors • • • • • • Type specially designed for contacting all common switch connectors Special design enables contacting in small grids up to 18GHz Optimized for long life Easy and flexible mounting via flange Connection via mSMP or SMA Suitable cables available Probes for standard RF-pads • • • • • • Special versions of the HF860 series for contacting standard PCB pads Up to 6GHz Mounting via receptacle Connection via MCX Solutions available for all standard PCB pads Suitable cables available Probes for...

Open the catalog to page 7
ELECTRONIC TESTING - 8

INDUSTRY APPLICATIONS RADIO FREQUENCY PROBES Standard probes for coaxial connectors • • • • • • • Series for contacting all common standard coaxial connectors Mounting via receptacle (different versions available) Up to 8GHz Easily adaptable and cost effective Inner pin replaceable for better lifetime Connection via MCX Suitable cables available Short standard probes for limited spaces • • • • Series for contacting all common standard coaxial connectors with limited space Short version of the HF860 series (same technical data) Up to 8GHz Mounting via receptacle (H830) RF-optimised probes...

Open the catalog to page 8
ELECTRONIC TESTING - 9

CONTACT E-MOBILITY & BATTERY CONTACTING battery@feinmetall.com ELECTRONIC TESTING electronic@feinmetall.com FINE PITCH TESTING finepitch@feinmetall.com INTERFACE SOLUTIONS interface@feinmetall.com SEMICONDUCTOR TESTING PRODUCTS semiconductor@feinmetall.com WIRE HARNESS TESTING wireharness@feinmetall.com PASSION FOR FINEST TECHNOLOGY. > FEINMETALL.COM 1131132 - ELECTRONIC TESTING / Version 1.0

Open the catalog to page 9

All Feinmetall GmbH catalogs and technical brochures

  1. contact probes

    148 Pages