AUTOMATIC DRUM FILLING MACHINE TYPE 33
2Pages

AUTOMATIC DRUM FILLING MACHINE TYPE 33 The CompactLine drum filling machine type 33 with three stations working in parallel is designed for the fully automatic and calibrated filling of drums. In the first station, the drums are automatically positioned and de-bunged. At the same time, an open drum is filled in the filling station and a filled drum is closed in the closing station. A chain conveyor moves the drum in single cycle through the filling machine and feeds them to the working stations. Instead of the closing station, a 2nd filling station can be installed so that the machine can be operated with preand final filling to increase the output. Essential accessories are drip collecting, gas exhaust, even directly at the bunghole, overflow signals, collecting basin, earthing device, inert gas purging via double jacket filling lance, base height adjustment for drum heights between 810 mm and 970 mm and devices for manual drum closing. The benefits   Compact ready-to-use machine which can control one roller conveyor each in the in-feed and out-feed area   Stainless steel and acid protection design available   Touch panel as operating interface with integrated weigh scale terminal and monitoring   255 product files   Tare check, flow rate control, fill time monitoring   Below-surface filling with lance raise by weight   Product hose with direct filling valve connection   ATEX design possible. If no de-bunging tool is installed, drum inertising is possible in the positioning station TECHNICAL DATA | DESIGN Type 33.1-0-AZn Below-surface mode, for liquids which produce foam or gas during filling, with de-bunging and bunging Nominal output approx. 60 drums/h referred to 7l/s in coarse fill Below-surface filling with pre- and final filling Nominal output approx. 100 drums/h referred to 7l/s in coarse fill per filling valve As above, but additionally with de-bunging and plug dropping onto the drum head All types as above, but Types 33.1-0-__x All types as above, but ATEX compliant for the use in hazardous area (zone 1). For legal reasons the output is slightly less for ATEX design Below-bunghole filling for uncritical liquids

FEOD-PB-33-en-1215, Printed in Germany ©FEIGE FILLING. Jede Art von Vervielfaltigung, auch auszugsweise, nur mit Genehmigung TECHNICAL DATA Electric design 3x400V/N/PE/50Hz, input power approx. 3 kVA ATEX design II 2G c IIB T3 Air consumption 180 Nl/cycle for below-surface filling, 150 Nl/cycle for below-bunghole filling Weight 1100 kg Weighing range, approved for verification 30 to 300 kg, increments 0.1kg External control dry contacts for pilot valves or 4 to 20mA for customer's product pump Ambient temperature 5° to 35°C All information is meant for...