AUTOMATIC DRUM FILLING MACHINE TYPE 31 The CompactLine drum filling machine type 31 is designed for the fully automatic and calibrated filling of 216.5l drums. Open drums are automatically positioned and filled in the working station. A roller conveyor moves the drums through the filling machine and a drum lift raises the drums from the conveyor onto the weigh scale. Essential accessories are drip collecting, gas exhaust, even directly at the bunghole, overflow signals, collecting basin, earthing device, inert gas purging via double jacket filling lance, base height adjustment for drum heights between 810 mm and 970 mm and devices for manual drum closing. The benefits   Compact ready-to-use machine which can control one roller conveyor each in the in-feed and out-feed area   Stainless steel and acid protection design available   Touch panel as operating interface with integrated weigh scale terminal and monitoring   255 product files   Tare check, flow rate control, fill time monitoring   Below-surface filling with lance raise by weight   Product hose with direct filling valve connection   ATEX design possible TECHNICAL DATA | DESIGN Type 31.1-0-P0n Automatic drum filling machine, below-surface mode, for liquids which produce foam or gas during filling Automatic drum filling machine, below-bunghole mode, for uncritical liquids ATEX compliant for the use in hazardous area (zone 1)

TECHNICAL DATA Electric design 3x400V/N/PE/50Hz, input power approx. 3 kVA ATEX design II 2G c IIB T3 Air consumption 30 Nl/cycle for below-surface, 20 Nl/cycle for below-bunghole Weighing range, approved for verification 30 to 300 kg, increments 0.1kg Nominal output approx. 50 drums/h referred to 7l/s in coarse fill for legal reasons slightly less for ATEX design External control dry contacts for pilot valves or 4 to 20mA for customer's product pump Ambient temperature 5° to 35°C All information is meant for orientation. We would be glad to prepare a binding quotation. FEIGE...