• Each tag can be programmed and erased separately.
• Compact construction for easy installation.
• Memory capacity for 200 user transponders.
• Programming via master card.
• Suitable for both indoor and outdoor use.
• Optional external antenna available.
• Available as a circuit board.

• Dimensions: 113 mm x 83 mm x 24.5 mm.
• Weight: 120 g.
• Housing: Plastic ASA.
• Protection class: IP 54.
• Operating frequency: 125 kHz.
• Supply voltage: 12-24 V/DC or 12-15 V/AC, 50-60 Hz.
• Current consumption: max. 1.5 W.
• Read range: up to 10 cm (depending on transponder type and size).
• Integrated antenna, no interface.
• Indicator: Two-digit seven-segment display.
• Supported transponders: 125 kHz transponders (e.g., EM 4001, EM 4002, etc.).
• Memory: 200 transponders.
• Outputs: 1 Relay (changeover contact), load-bearing capacity 24 V/AC; 1.5 A.
• Temperature range: Operation and storage from -25 °C to 70 °C.
• Relative air humidity: 5-95% (non-condensing).

The ID ZK is a read-only terminal that operates as a stand-alone device without needing a PC or controller connection. It can monitor entrances such as doors, turnstiles, or barriers and works with both RO and RW transponders. Programming and deletion of transponders are managed via a master card. The device can read serial numbers of RW transponders, allowing integration into existing RW applications without issuing new transponders. An optional external antenna can be connected for enhanced functionality, and the device is available as a circuit board without housing.

• ID ZK.AB-A Compact Access Control Terminal.
• Accessories: ID ZK.ANT-A and ID ZK.ANT.10 external antennas for ID ZK.AB-A.