• Multi-tag card reader compatible with common 125 kHz transponders such as NXP HITAG and EM Read Only.
• Interfaces include RS232, Data-/Clock (Wiegand), or RS485.
• Suitable for both indoor and outdoor use with an IP54 protection rating.

• Dimensions: Card Reader - 84 mm x 84 mm x 22 mm; Wall-mounted housing - 78 mm x 78 mm x 18 mm.
• Material: Plastic (ASA) with an acrylic glass front; Color: White corpus with a black front panel.
• Weight: Approximately 150 g.
• Temperature Range: Operational from -25°C to 70°C; Storage from -40°C to 85°C.
• Humidity: 95% relative air humidity (non-condensing).
• MTBF: 307,000 hours.
• Supply Voltage: 12-24 V AC/DC; Max current consumption: 2.5 W.
• Interfaces: ID RW02.10-AD (RS232 and Data-/Clock), ID RW02.10-B (RS485, max 32 devices).
• LED: Bicolor (Red/Green/Orange).
• Operating Frequency: 125 kHz with an integrated antenna (approx. 70 mm x 70 mm).
• Read Range: Maximum 7 cm, depending on transponder size.
• Supported Transponders: 125 kHz ReadOnly and Read/Write transponders.
• Operation Modes: Polling-Mode & Auto-Answer-Mode.

• Radio Approval: Europe EN 300 330.
• EMC: EN 301 489.
• Safety: Low voltage EN 60950, Human Exposure EN 50364.
• Environmental Compliance: WEEE – 2002/96/EC, RoHS – 2002/95/EC.

The ID RW02.10-AD/-B RFID Card Reader is designed for wall-mounted applications, facilitating contactless data exchange with 125 kHz transponders for access control and time attendance. It requires an external power supply and communicates via serial (RS232 or RS485) or Data-/Clock interface (Wiegand).

• Card Reader ID RW02.10-AD or ID RW02.10-B.
• Wall-mounted housing for surface mounting.
• Installation manual.