Informer Radio Tone-Alert Radio Features • Instant alerting and notification for emergency situations • Rugged metal enclosure with internal wiring • High output speaker for tone and voice notifications • Optional EAS/SAME or Federal Signal digital protocols • Windows®-based software for easy programming • DTMF and two-tone decoding – standard • Desk or wall mounting models • External audio and control capabilities • US ETL Listed to UL Std 60065 • Canadian ETL Listed to UL Std 60065 for I-HIOW and I-UIOW Alerting the public of an emergency situation is now easier and more reliable than ever with Federal Signal’s Informer I-HIO and I-UIO radio receivers. Informer units are designed for one-way radio alerting applications. Informer Radio receivers come in either VHF or UHF-band models. Standard units decode DTMF, singletone, and two-tone sequential signals (optionally available are units for decoding EAS/SAME or Federal Signal digital protocols). The Informer is capable of generating four separate alarm sounds that can be accompanied by a live voice message. Informer units include a LED panel that flashes to immediately indicate transmission of an emergency alert. Other features include a 600-Ohm audio output, dual (N.C./N.O.) relay for external control, built-in diagnostics, and a LED test indicator. The receiver can be programmed to disable the"monitor" button in order to prevent end-users or unauthorized persons from listening to local-channel activity. The Informer I-HIO and I-UIO desktop versions feature an external AC transformer for power, as well as built-in battery backup. All wiring is routed to connectors located on the back of the unit for convenient access. Informer I-HIOW and I-UIOW receivers are designed to be wall mounted or recessed into the wall. All wiring is contained within the aluminum case, and five pre-punched, easy-to-remove conduit holes are available to facilitate wiring connections into and out of the unit. Informer I-HIOW and I-UIOW receivers include a 115/230VAC power supply pre-wired to internal terminal blocks and a built-in battery backup. These models feature mounting holes for easy top mounting of an optional Federal Signal LP1 Strobe light. Units are pre-wired to accommodate the LP1 Strobe which operates off the Informer’s internal power supply. Informer units are factory programmed for narrow-band operation and come with a one-year warranty. (see owner’s manual). 2645 Federal Signal Drive, University Park, IL 60484

Informer Tone-Alert RadioSpecifications Specifications CTCSS/CDCSS Decode with two-tone codes >400 Hz only. Tone frequency range 36.6 to 254.1 Hz, Tone accuracy >.05Hz Tone decode bandwidth +/- 1.1% Digital, golay (23,12) 23 bit digital word Digital data rate 134.4 Hz nominal Decode Turn on time <250ms., Turn off Time <1.2s. Acoustic Output2 I-HIOW/UIOW I-HIO/UIO *Frequency 405-420 special order requires ES-SMV. Contact factory for quote. Physical Dimensions I-HIOW/UIOW I-HIO/UIO Height x Width x Depth 8.3" x 7.0" x 3.3" 5" x 7" x 2-1/2" Specifications Reference Sensitivity1 Hum...