PA300
2Pages

Catalog excerpts

Electric Siren • Full-featured siren in compact package. • Easily accessible fuse protection. • Easy-to-operate and durable switching. • Effective TAP II intersection clearing. • Built-in noise canceling microphone. • Priority in place of hi-lo tone available. • Illuminated non-glare control panel. • Meets SAE/Class A with one 100-watt speaker. • External PA Gain control • Three-year warranty. • Meets SAE J1849 requirements for sound output Value and Unmatched Reliability The PA300 siren delivers exceptional value and unmatched reliability. This siren can provide either 100- or 200-Watt output to meet or exceed SAE J1849 and Class A requirements for sound when paired with a Federal Signal high-power speaker. A Wide Range of Features A wide range of features comes standard with any PA300 police siren. Included are 5 basic siren tones, TAP II (horn-ring transfer), PA, radio rebroadcast and air horn sound with siren override. TAP II allows for effective intersection traffic clearing capability without having to remove your hands from the steering wheel or your eyes from the road. There is also a “Press-and-Hold” function, depressing and holding the horn ring will produce an alternate sound for as long as the operator keeps the horn ring circuit depressed. Noise-canceling Microphone The PA volume level can be controlled with a rotary GAIN switch located on the unit’s backlit front panel, and radio rebroadcast volume is adjustable via an easily accessible rotary pot. The PA300 siren also includes a permanent noise-canceling microphone that produces high-quality voice reproduction without feedback squeal, and the push-to-talk switch will override any siren tone for instant PA use. Electrical System The totally enclosed, fully featured siren operates from any 12- or 24-volt negative ground vehicle electrical system. The PA300 can be powered directly by the car’s battery or through secondary power distribution centers. No matter how power is delivered, the PA300 siren is protected against most failure modes, including reversed polarity, by a fuse that is readily available and can be replaced without tools. Compact Size PA300 siren packages are built small and compact and each unit comes supplied with its own “U” shaped mount bracket. There are no protruding components to interfere with mounting arrangements and all electrical connections are easy “plug-and-play” type which are located on the rear of the siren’s housing. Mounting Options An optional stainless steel bezel is available for flush mounting and a wide variety of switch controls that flush mount to

Open the catalog to page 1

Specify Model 690000 Electronic siren, 12-volt, 100-watt, includes wired-in microphone, standard siren tones with air horn and radio rebroadcast 690010 690000 that is 12-volt, 200-watt version 690009 Electronic siren, 24-volt, 200-watt version 761300 Retrofit adapter cable (used when replacing PA300 model with new 690XXX model) 690002 690000 with Priority tone in place of Hi-Lo DSM Stainless steel bezel for flush mounting PA300 SW300 Switch control with six SPST rocker switches, mounts flush to PA300 SW400SS Switch control with slide-switch and four SPST rocker switches, mounts...

Open the catalog to page 2