Informer-IP, Two-Way IP-enabled Intercom and Alarm Initiation Point Federal Signal’s longstanding Informer is now IP-enabled. The Informer-IP can be used as a warning device, a two-way intercom and an alarm initiation point that connects to the Commander® On-Premise System. The Informer-IP’s internal speaker and microphone provide clear two-way intercom voice communications. Incoming warnings and alerts can be live voice, pre-recorded messages or tone files. Up to six different predefined alert events can be triggered from the Informer-IP — two from the device and four from the key fob. Alert messages initiated from the Informer-IP or key fob can be sent to emergency personnel via email, SMS, computer pop-up, phone, handheld radios; and can also be used to activate other Informer units and sirens. The Informer-IP features an audio output for connecting public address systems, two relay outputs for controlling strobes or other devices, and an RS232 port for driving a scrolling message display in order for the same message that is heard over the speaker to simultaneously be viewed on the display. The Informer-IP provides the same tone and voice alerts available with Federal Signal’s UltraVoice™ outdoor siren controllers for seamless indoor and outdoor mass notification. The Informer-IP I-IP-IO model is designed for desktop use. Power options include an external AC transformer or PoE (Power over Ethernet). All wiring runs to accessible connectors on the back of the unit for quick and easy installation. Also available is the Informer-IPW, which is designed to be wall mounted or recessed into the wall. All wiring is contained within an aluminum case and five pre-punched, easy-to-remove conduit holes are available to facilitate wiring connections into and out of the unit. The case has top mounting holes and is pre-wired for the LP1 strobe option. Schools, hospitals, police and fire stations, government facilities and industrial plants will find that the Informer-IP provides an unmatched value for their indoor alerting and notification needs. • Two-way alerting and intercom capabilities • Power over Ethernet (PoE) or AC powered • Panic button alarm • Internal speaker rated at 80 dB @ 10' • Receives live voice, text-to-speech and prerecorded voice or tone files • Desk or wall mount models

• Two Relay Outputs rated at 5 Amps @ 30VDC. Relay outputs can be programmed to cycle on and off, or come on continuously with the on time, off time, and total-time being programmable. • Tone and voice compatible with Federal Signal UltraVoice controllers • Small size with rugged construction • Wired Ethernet, can be powered via PoE • Input: 115 to 230VAC, 50/60Hz, 350mA maximum (I-IPW) nominal 120VAC 60Hz (I-IP-IO) • 80 dB speaker with adjustable volume control • LED status indicators for Power, Alert, Test and Talk • Local Mic for intercom use • One direct wire input for customer supplied panic button...