FEDERAL SIGNAL CORPORATION Explosion-Proof LED Warning Light 2000 Series Model LED The 2000 Series Model LED beacon, with XLTTM technology, is a visual signal warning light for use in hazardous locations requiring ATEX approval. The beacon can produce three light patterns depending on the configuration of a field selectable jumper wire or remote contact closure. The light patterns are steady-on, slow flash or rapid flash. An optional telephone initiation feature also allows the beacon to flash when telephone ringing voltage is present. DESIGNED FOR USE IN ATEX ZONE RATED ATMOSPHERES • Super bright output with XLT LED Technology The 2000 Series LED beacon is sealed from dust and water by a nitrile rubber o-ring. All exterior cast aluminum surfaces are finished in powder coat paint and external hardware is manufactured from stainless steel to resist corrosion. Available signal colors are Amber, Blue, Clear, Green, Red and Yellow. • 3 remotely selectable flash patterns • 50,000 hour lamp life The 2000 Series LED beacon is externally powered by 24VDC or 110-240VAC source. All AC powered units feature a switch mode power supply that accommodates a wide input voltage range without requiring any additional configuration from the user. The current consumption from the beacon is less than 500 mA and the in-rush current is low enough to allow PLC initiation without the use of an external relay. Screw type terminal blocks are provided for field wiring on all units. • Available in six colors • Ex ‘e’ terminal chamber available • AC and DC voltage ranges • Approved for use in Zone 1, 2, 21, 22 Atmospheres All variations of the 2000 Series LED beacon feature a four entry fixture to allow cable looping. These cable entries are metric (M20 X 1.5) but other configurations are available upon request. Operating Flash Rate/ Model Voltage Current Minute Specify color: (A) Amber, (B) Blue, (C) Clear, (G) Green, (R) Red or (Y) Yellow

EXPLOSION-PROOF WARNING LIGHT (2000 SERIES LED) 0.51"/ 13 mm 9.84"/ 250 mm 8.86"/ 225 mm SPECIFICATIONS Lamp Life: 50,000 Hours 50,000 Hours Terminals: Light Source: LED Array LED Array Ex d: 4 way block mounted PCB Operating Temperature: Ex de: 12 way block in terminal chamber Ex d and Ex de: -40°F to 131°F -40°C to 55°C Net Weight: Cable entries: Ex d: 13.23 lbs. 6.0 kg Ex d: 4 entries - M20 x 1.5 Ex de: 15.43 lbs. 7.0 kg Ex de: 4 entries - M20 x 1.5 Shipping Weight: 16.5 lbs. 7.5 kg Mounting: Via fixed cast lugs at two Height: 9.84" 250 mm mounting points Width: 10.04" 255 mm Body: Marine...