Catalogs >
FEDERAL SIGNAL >
151XST Hazardous Location Warning Light

151XST Hazardous Location Warning Light
2Pages

Catalog excerpts

151XST Hazardous Location Warning Light - 1

FEDERAL SIGNAL CORPORATION Hazardous Location Warning Light Model 151XST Federal Signal’s Model 151XST hazardous location strobe light provides 80 high-intensity flashes per minute. This warning light is available in 12-24VDC, 120VAC and 240VAC, 50/60Hz. RUGGED DESIGN FOR USE IN HAZARDOUS LOCATIONS The Model 151XST strobe light is UL Listed and CSA Certified for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III. The 151XST meets Type 4X water-tight, dust-tight, and corrosionresistant requirements and is constructed to IP66. This hazardous location warning light has an aluminum base, coated for corrosionresistance, that can be ordered for mounting on a 3/4-inch NPT pipe or a surface. The Dome Guard (included) fits over the glass dome to protect it against accidental collision with moving equipment, such as forklifts. • Available in 12-24VDC, 120VAC and 240VAC • Five dome colors • 10,000-hour high-intensity strobe • Available in 3/4-inch NPT pipe mount or surface mount The 151XST produces 165 effective candela (ECP) and 520,000 peak candela. It is available in five dome colors including Amber, Blue, Clear, Green and Red. • Dome guard included • Indoor/outdoor use Federal Signal’s rugged 151XST strobe warning light is specifically designed for hazardous locations or corrosive environments where a very bright visual signal is required. This warning light can be used for plant evacuation or other communication needs. • Type 4X, IP66 enclosure • Marine rated • UL and cUL Listed and CSA Certified Model Voltage Operating Flash Rate/ Candela Current Minute Peak1 ECP2 Mount 1 2 151XST-_012-024-_ 12-24VDC 1.3-0.60 amps 80 520,000 165 /4" NPT Pipe 1 2 151XST-_120-_ 120VAC 50/60Hz 0.35 amps 80 520,000 165 3/4" NPT Pipe 1 2 151XST-_240-_ 240VAC 50/60Hz 0.18 amps 80 520,000 165 3/4" NPT Pipe 1Include 3 (S) Surface Mount color: (A) Amber, (B) Blue, (C) Clear, (G) Green or (R) Red 2Indicates Hazardous Location Rating: T-Code at Maximum Ambient Temperature, °C 5 WA y yr RRANT Y Hazardous Location Class I, Div 2, Groups A, B, C & D 66°C 1 Peak candela is the maximum light intensity generated by a flashing light during its light pulse T2B/300º 2 ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily Class II, Div 1, Groups E, F & G T5/100º Class III T5/100º

Open the catalog to page 1

151XST Hazardous Location Warning Light - 2

HAZARDOUS LOCATION STROBE LIGHT (151XST) Surface Mount Pipe Mount Dome Guard (Included) Dome Guard (Included) 5.5"/139.7 mm Glass Dome Glass Dome Strobe Tube 8.18" / 207.8 mm Gasket Aluminum Base Strobe Tube 9.25"/ 234.95 mm Gasket 2x 3/4" NPT Entry 6.52" / 165.6 mm Aluminum Base Power Wires 5.58" / 141.6 mm Power Wires 3/4" NPT Pipe Mount 3.00" / 76.2 mm 0.26" / 6.6 mm 0.51" / 13.0 mm SPECIFICATIONS Lamp Life: Light Source: Operating Temperature: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER 10,000 Hours Strobe tube -67°F to 150°F 3.8 lbs. 4.5 lbs. 9.25" 5.5" 10,000 Hours...

Open the catalog to page 2