video corpo

NATURAL GAS METERS
22Pages

{{requestButtons}}

Catalog excerpts

NATURAL GAS METERS - 2

Technical Features / General Features 1 Error Curve and Pressure Loss Curve 2 Points to be considered / Technical Drawings 2 FNG6 3 Technical Features / General Features 3 Error Curve and Pressure Loss Curve 4 Points to be considered / Technical Drawings 4 FNG10 5 Technical Features General Features 5 Error Curve and Pressure Loss Curve 6 Points to be considered / Technical Drawings 6 Technical Features / General Features 7 Error Curve and Pressure Loss Curve 8 Points to be considered / Technical Drawings 8 Technical Features / General Features 9...

Open the catalog to page 2
NATURAL GAS METERS - 3

Technical Features • Connection points; manufactured as two outlet fittings • As inner volume of 1.2 dm3 suits best to operating conditions, it can operate in optimal rates during high haulage. SLM AT TYPE APPROVED General Features • Outer frame is made of deep drawing sheet and is dyed with electrostatic powder paint. • Gas input and output fitting spindles are of 110 mm GIW outer measurement. • In the case of reverse connect of gas meter (giving gas flow from gas exit side); numarator doesn’t turn and gas meter doesn’t make record will be corrected as mentioned. • Minimum pieces of...

Open the catalog to page 3
NATURAL GAS METERS - 4

Points to be considered • The counter should be protected by an appropriate protective panel from weather conditions, damages that may arise from accidents or from actions that could harm its operation (impacts, vibrations, corrosion, very low or high temperatures, humidity, etc). • Electric switches, counters, junction boxes, instruments and devices that operate with electricity such as bells should not be placed close to the device. In obligatory circumstances this distance should be minimum 1.5 meters. • It should not be forgotten that a direct or indirect interference by unauthorized...

Open the catalog to page 4
NATURAL GAS METERS - 5

Technical Features • Connection points; manufactured as two outlet fittings. • As inner volume of 2.2 dm3 suits best to operating conditions, it can operate in optimal rates during high haulage. General Features • Outer frame is made of deep drawing sheet and is dyed with electrostatic powder paint. • Gas input and output fitting spindles are of 110 mm. • In case that the gas meter is inverse connected (inflicting gas flow in gas output direction), the gas inner mechanism does not allow gas transition and the numarator does not spin. • Minimum pieces of engineering plastics are used on gas...

Open the catalog to page 5
NATURAL GAS METERS - 6

Flow m3/hour Points to be considered • The counter should be protected by an appropriate protective panel from weather conditions, damages that may arise from accidents or from actions that could harm its operation (impacts, vibrations, corrosion, very low or high temperatures, humidity, etc). • Electric switches, counters, junction boxes, instruments and devices that operate with electricity such as bells should not be placed close to the device. In obligatory circumstances this distance should be minimum 1.5 meters. • It should not be forgotten that a direct or indirect interference by...

Open the catalog to page 6
NATURAL GAS METERS - 7

• Connection points; manufactured as two outlet fittings. • As inner volume of 5 dm3 suits best to operating conditions, it can operate in optimal rates during high haulage. 0 AT TYPE APPROVED General Features • Outer frame is made of deep drawing sheet and is dyed with electrostatic powder paint. • Gas input and output fitting spindles are of 280 mm. • In case that the gas meter is inverse connected (inflicting gas flow in gas output direction), the gas inner mechanism does not allow gas transition and the numarator does not spin. • Minimum pieces of engineering plastics are used on gas...

Open the catalog to page 7
NATURAL GAS METERS - 8

Points to be considered • The counter should be protected by an appropriate protective panel from weather conditions, damages that may arise from accidents or from actions that could harm its operation (impacts, vibrations, corrosion, very low or high temperatures, humidity, etc). • Electric switches, counters, junction boxes, instruments and devices that operate with electricity such as bells should not be placed close to the device. In obligatory circumstances this distance should be minimum 1.5 meters. • It should not be forgotten that a direct or indirect interference by unauthorized...

Open the catalog to page 8
NATURAL GAS METERS - 9

Technical Features Gas Types Natural Gas- Air Gas Body Deep Drawing Sheet Iron Circuit Procesor based special design manufactured via SMD Technology Power feeding 8,5 Ah long-lasting lithium main battery 1,2 Ah long-lasting lithium spare battery 1,5 F super capacitor Display Special design advanced LCD, Safety Flow consumption detection Measuring Method Magnetic reading Card Reader Smart card reader IS07816 compatible Data Safety Permanent memory unaffected from interuptions (EEPROM) Counter Safety Perception of cover and battery opening Magnetic external...

Open the catalog to page 9
NATURAL GAS METERS - 10

The Advantages of the Prepaid System: • Saves the companies from visiting subscribers each month for counter- reading processes. • The consumed gas amount is received in advance. • Subscribers are not affected from price changes based on the gas they have purchased. • It supports a more conscious consumption. • Saves subscribers from invoice payments and from inconveniences like chasing the last payable day of invoice. • Saves entities from gas cutting-openig processes due to payment problems. Components of Prepaid Gas Distribution System Can be summarized as; • Prepaid counter and credit...

Open the catalog to page 10
NATURAL GAS METERS - 11

Technical Features Body Deep Drawing Sheet Iron Circuit Procesor based special design manufactured via SMD Technology Power feeding 8,5 Ah long-lasting lithium main battery 1,2 Ah long-lasting lithium spare battery 1,5 F super capacitor Display Special design advanced LCD, Display illuminating feature at dark Safety Detection of extreme consumption and gas leakage Measuring Method Optical reading Card Reader IS07816 compatible smart card reader Data Safety Permanent memory unaffected from interruptions (EEPROM, DATA FLASH) Counter Safety Detection of cover...

Open the catalog to page 11

All Federal Elektrik catalogs and technical brochures

  1. ANALYZER

    11 Pages

  2. 20 relays

    6 Pages

Archived catalogs

  1. Contactors

    22 Pages

  2. Relays

    7 Pages

  3. Smart relays

    5 Pages

  4. Cam switches

    5 Pages