DC power supply linear regulated for 115 / 230VAC input voltage type PSW500T Technical data Input data Inputvoltage tolerance Input current at nominal load Input current peak Protective circuit Hold-up time Output data Output voltage UNominal Output current iNominal Current limiting Residual ripple (100Hz) Control data Control deviation load Control deviation supply Control time Operating data Duty circle Operating temperature range Derating Storage temperature range Cooling see table below see table below 1,1 x In < 2mV < 200mV with load variation 10...90% < 10mV with supply variation ±10% < 50pSek. with load variation 10...90% recommended respective distance 15mm each Safety devices Fuse for input Fuse for output Overload protection MTBF Safety data Test voltage transformer High voltage resistance at 115VAC 12,5A delayed / at 230VAC 6,3A delayed not necessary - cont. short-circuit proof integrated into device >380.000 h 5 kVac in accordance to VDE 0551 Primary circuit - secondary circuit 3,75 kVac | Output separated according to VDE 0551 □ Extra low safety potential □ Overload- and open circuit protected short circuit proof | Parallel connection possible | Suitable for the tropics - Epoxy resin casted | Operating status shown by LED | | Safety acc. to VDE, EN, UL, CSA Protection class Class 1 with PE-connector (EN 60950) Extra low safety potential PELV (EN60204), SELV (EN 60950) Ambient humidity 95% relative humidity, yearly average dewing allowed for use in tropical ambient Protective class enclosure IP 65 Protective class terminals IP 20 (VGB4) Applied construction regulations with screws P.O. Box 1521 Phone : +494102 - 42082 E-Mail : [email protected] Ahrensburg Germany Telefax: +494102 - 40930 internet: www.feas.de