DC power supply linear regulated for 115 / 230VAC input voltage type PSW250 Technical data Input data Input voltage AC Inputvoltage tolerance Input current at nominal load Input current peak Protective circuit Hold-up time Output data Output voltage UNominal Output currentNominal Current limiting Control data Control deviation load Control deviation supply Control time Operating data Duty circle Operating temperature range Storage temperature range Safety devices Fuse for input Overload protection < 200mV with load variation 10...90% < 10mV with supply variation ±10% : 50pSek. with load variation 10...90% recommended respective distance 15mm each not necessary - cont. short-circuit proof integrated into device | Output separated according to VDE 0551 □ Extra low safety potential □ Overload- and open circuit protected short circuit proof | Parallel connection possible | Suitable for the tropics - Epoxy resin casted | Operating status shown by LED | | Safety acc. to VDE, EN, UL, CSA Safety data Test voltage transformer 5 kVac in accordance to VDE 0551 High voltage resistance Primary circuit - secondary circuit 3,75 kVac Protection class Class 1 with PE-connector (EN 62368) Extra low safety potential PELV (EN60204), SELV (EN 62368) Ambient humidity 95% relative humidity, yearly average dewing allowed for use in tropical ambient Protective class enclosure IP 65 Protective class terminals IP 20 (BGV A3) Applied construction regulations according to VDE VDE 0100, 0110, 0113, 0551, 0160/W2, 0806 Mechanics Mounting with screws P.O. Box 1521 Phone : +494102 - 42082 E-Mail : [email protected] Ahrensburg Germany Telefax: +494102 - 40930 Internet: www.feas.de