*mydirectindustry

PSW15005

Product catalog summary

Specifications:
The PSW15005 is a linear regulated power supply with compliance to various construction regulations including CSA/UL, VDE, IEC, and EN standards. It features a test voltage transformer of 5kV and high voltage resistance of 4.4kV. The device is designed for use in tropical environments with a protection class of IP65 and is vibration-proof according to IEC 60068-2-27.

Safety Data:
The power supply includes safety devices such as fuses for input and output, overload protection, and a hold-up time of 20 ms. It operates with a protective class enclosure of Class 1 with PE-Connection and terminals of IP 20.

General Data:
The PSW15005 has dimensions of 110mm x 100mm x 120mm and weighs approximately 3.2kg. It can be mounted on DIN rails or walls. The input data includes an AC input voltage of 115/230 VAC with a frequency of 45-66Hz and a consumption of max. 285VA.

Output Data:
The device provides an output voltage of 5VDC with a range of adjustment from 3.3 to 6.0 VDC and a maximum output current of 10.0A. The power output is 50 Watts with a residual ripple of less than 5 mVrms.

Operation Data:
The power supply operates at 100% duty cycle within a temperature range of -40°C to +70°C and has a temperature coefficient of less than 500ppm/K. It supports parallel connection and has a derating from 40°C. The efficiency is approximately 30% with an MTBF of over 400,000 hours.

Status & Signal:
The device includes status indicators such as relay overtemperature signals and LED indicators for operating, output, and overtemperature status.

Product Variants:
The series includes types PSW15005, PSW15012, and PSW15024 with output voltages of 5VDC, 12VDC, and 24VDC respectively, and varying output currents.

Catalog excerpts

Data sheet Power supply linear regulated: PSW15005 Technical data General data Typ FEAS Order number Productdescription Product function PSW15005 58703 Power supply linear regulated DC Power supply Input data AC input voltage frequence Inputvoltage tolerance Input current at nominal load Consumption Output data Output voltage Unominal Range of adjustment Output current Inominal Current limitig Power Residual ripple (100Hz) Operation data duty circle Efficiency Parallel connection Operating temperature range Storage temperature range Temperature coefficient Derating Cooling Load current diagram at nominal input Volt DC Output voltage 24V Installation altitude MTBF Fuse for input Fuse for output Overload protection Hold up time Output Current Protective class enclosure Protective class terminals Vibration proof at 115 VAC max. 3.0 A / at 230 VAC max. 1.5 A delayed not necessary - cont. short-circuit proof integrated into the device 20 ms typ. Safety data Test voltage transformer High voltage resistance Degree of EMI suppresion Protection class Extra low safety potential Ambient humidity Iout Inenn 100% approx. 30% Yes -40°C to +70°C -40°C to +105°C < 500ppm / K from 40°C selfcooling recommended respective distance 15mm each unlimited > 400.000h Safety devices 5kVAC acc. to VDE0551 Input/Output 4,4kVAC accord. VDE0806/IEC380 < K acc. to VDE 0875 and VDE 0877 Class 1 with PE-Connection (EN 60950) PELV (EN60204), SELV (EN 60950) 95% relative humidity, yearly average dewing allowed for use in tropical ambient IP 65 IP 20 (BGV A3) >30g at 33Hz in X, Y and Z acc. to IEC 60068-2-27 Status & Signal Status indicator Signals LED - Operating, Output, Overtemperature Relay Overtemperature Applied construction regulations according to VDE IEC EN Products of the series: Type Order number Output voltage Output current Mechanical data Mounting Dimensions (W x H x D) Weight on DIN rails or wall mounting with screws 110mm x 100mm x 120mm approx. 3.2kg Notes / Comments E-Mail: [email protected] Internet: www.feas.c

Open the catalog to page 1

All FEAS GmbH catalogs and technical brochures

Archived catalogs

FEAS GmbH - product range
2 Pages
FEAS Catalogue
24 Pages