DC power supply linear regulated for 115 / 230VAC input voltage type PSW250
1Pages

DC power supply linear regulated for 115 / 230VAC input voltage type PSW250 Technical data Input data Input voltage AC Inputvoltage tolerance Input current at nominal load Input current peak Protective circuit Hold-up time Output data Output voltage UNominal Output current INominal Current limiting Residual ripple (100Hz) see table below see table below 1,1 x IN < 2mV Control data Control deviation load Control deviation supply Control time < 200mV with load variation 10...90% < 10mV with supply variation ±10% < 50µSek. with load variation 10...90% Operating data Duty circle Operating temperature range Derating Storage temperature range Cooling 100% - 30°C to +70°C from 40°C -30°C...+105°C selfcooling recommended respective distance 15mm each Safety devices Fuse for input Fuse for output Overload protection MTBF not necessary - cont. short-circuit proof integrated into device >380.000 h Safety data Test voltage transformer High voltage resistance Degree of EMI suppresion Protection class Extra low safety potential Ambient humidity Output separated according to VDE 0551 Extra low safety potential PELV (EN 60204), SELV (EN 62368) Protective class enclosure Protective class terminals Vibration proof Overload- and open circuit protected short circuit proof 5 kVac in accordance to VDE 0551 Primary circuit - secondary circuit 3,75 kVac acc. to VDE 0806 / IEC 380 in acc. to VDE 0871 B, EN 55022/B Class 1 with PE-connector (EN 62368) PELV (EN60204), SELV (EN 62368) 95% relative humidity, yearly average dewing allowed for use in tropical ambient IP 65 IP 20 (BGV A3) >30g at 33Hz in X,Y and Z, acc. to IEC 60068-2-27 Applied construction regulations Parallel connection possible Suitable for the tropics - Epoxy resin casted Operating status shown by LED Safety acc. to VDE, EN, UL, CSA Mechanics Mounting Range of adjustment output voltage Nominal output current E-Mail : info@feas.de Internet: www.feas.de Nominal output voltage with screws