PAP Cable glands for armoured cables

Product catalog summary

Overview: This document provides technical specifications and compliance information for explosion-proof electrical equipment, specifically focusing on cable glands used in hazardous environments.

Directives and Compliance: The equipment complies with Directive 94/9/EC until April 19, 2016, and Directive 2014/34/EU from April 20, 2016. It adheres to standards EN/IEC 60079-0, EN/IEC 60079-1, EN/IEC 60079-7, and EN/IEC 60079-31. The EC Type-Examination Certificate is INERIS 09 ATEX 0028X.

Protection and Temperature Ratings: The equipment offers a protection degree of IP66 or IP66/68 and operates within ambient temperatures of -40°C to +90°C with EPDM rubber rings and -60°C to +180°C with silicon rubber rings.

Certifications: Additional certifications include IECEx, INMETRO, EAC, RINA, Russian Marine Certificate (RMRS), and Korean certification (Kc).

Applications: Designed for steel wire armoured cables and steel tape armoured cables, the equipment is suitable for both indoor and outdoor use. It features double compression for under and overall armour cable sealing, with optional resin sealing in the chamber for barrier type versions.

Installation and Classification: Suitable for hazardous areas Zone 1/2 (Gases) and Zone 21/22 (Dusts), classified under Group II - Category 2G 2D.

Mechanical Characteristics: The body and cap are made from OT-58 marine brass or AISI-316L stainless steel, with full nickel plating for brass materials. Rubber rings are made from EPDM or silicon, with a shore hardness of 50-60 and 60 respectively. The chamber for sealing is made from OT-58 marine brass.

Components and Ordering: The document lists components such as body, inner sealing ring, armour clamping cone, gland barrel, and more. It provides examples for ordering cable glands, specifying material and threading types.

Remarks: Technical characteristics are subject to change based on national and international specifications and technological advancements.

Catalog excerpts

Explosion Proof Electrical Equipment Explosion Proof Electrical Equipment PAP Cable glands for armoured cables Ex Pressacavi Ex Cable Glands Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) Classification: Group II - Category 2G 2D REFERENCE STANDARDS Directive 94/9/EC (until April 19th, 2016) and Directive 2014/34/EU (from April 20th, 2016) II 2 G Ex d / Exe / Exia IIC Gb II 2 D Ex tb IIIC Db EXECUTION RULES OF COMPLIANCE EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-7; EN/IEC 60079-31 PROTECTION DEGREE IP66 or IP66/68 -40°C ÷ +90°C (Rubber rings EPDM-60) -60°C ÷ +180°C (Rubber rings SILICON) AMBIENT TEMPERATURE OTHER AVAILABLE CERTIFICATES IECEx: IECEx INE 13.0017X INMETRO: CEPEL 12.2177X EAC: TC RU C-IT.ГБ08.В 01624 (-75°C ÷ +180°C) RINA: ELE18111CS_016 RUSSIAN MARINE CERTIFICATE (RMRS): 13.03518.315 Kc (Korean certification):14-KB4B0-0455X Mechanical characteristics Body / cap OT-58 marine brass (ON) - AISI-316L stainless steel (IX) full nickel plating threatment (brass material only) Rubber rings EPDM rubber- 50-60 shore hardness - Silicon rubber - 60 shore hardness silicon rubber - 60 shore hardness Skid washer OT-58 marine brass (“R” version only) Applications For steel wire armoured cables (swa) for steel tape armoured cables Double compression type for indoor and outdoor use Provided armour clamping using clamping arrangements suitable for all armour wire/braid types Double compression - under armour and overall of armour cable ( inner and outer sealing ) Sealing with proper resin into “chamber of sealing” ( on barrier type version “R” only ) On Request Accessories: • Locknuts, Gaskets, PVC Shrouds, Earthing Tags, Sealing (See DL-NW-PTD-ET bulletin)

Open the catalog to page 1

PAP Cable gland selection table ENTRY THREAD SIZE NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL NICKEL PLBRASS STAINLESS STEEL CABLE GLAND ORDERING Chamber will be filled with sealing when cable gland is completely assembled. Due to the development of the national and international specifications and of the technology, the above technical characteristics showed on...

Open the catalog to page 2

All F.E.A.M. s.r.l. catalogs and technical brochures

Miscellaneous
12 Pages
Control stations
14 Pages
Conduit fittings
14 Pages
Enclosures
50 Pages
Lighting fixtures
94 Pages