flox[control] Combi Combi Gas Control Unit for Foundries
3Pages

{{requestButtons}}

Catalog excerpts

flox[control] Combi Combi Gas Control Unit for Foundries - 1

Maximum flow Operating temperature °C from -10 to+60 FCTechnik flox[control] Combi Combi Gas Control Unit for Foundries m

Open the catalog to page 1
flox[control] Combi Combi Gas Control Unit for Foundries - 2

1 General The Combi Gas Control Unit flox[control] çombi comprised all relevant purgingshielding- and control-Functions. Following processes can be determined: • Controlled Ladle Purging (CLP) • Regulation of the gas amount during casting at the ingots • Shielding at the collector nozzle of the ladle • Testing of the purging plug (TST) at the ladle preparation area 2 Functions Ladle Purging (CLP) All the required datas and parameters for the purching process are stored in the Gas Control Unit. This programm regulates the wohle process. The process parameters can be considered by the...

Open the catalog to page 2
flox[control] Combi Combi Gas Control Unit for Foundries - 3

The test unit TST is designed to test the purging plugs in the ladle preparation area. This is to avoid purging failures in the following heat and to prevent the purging plug from unnecessary excessive cleaning (burning, torching) with oxygen. Argon, Nitrogen or compressed air are used as test media. It's not allowed to use natural gas or any other inflammable gas. Test Functions: The plug test function generates an indication about the porous plug condition. At a predefined pressure setting the actual flow rate is measured. The actual flow rate defines the condition of the plug. Three...

Open the catalog to page 3

All FCTechnik - Gas Control Systems - flox[on] MFC catalogs and technical brochures

  1. flox[on] J

    2 Pages

Archived catalogs

  1. FCTechnik

    3 Pages

  2. Gas Control

    3 Pages

  3. flox[on] S

    2 Pages

  4. flox[on] B

    2 Pages