FILTRI • INDUSTRIAL EQUIPMENTS • UNI-BOX UNI-BOX Duct filter housing container Description Duct housing for filters. It is equipped with two housings: one for filters with thickness 48 mm and one for rigid or synthetic bag filters, absolute filters or activated carbon cartridges. Thanks to its modularity and easy installation, which can be with vertical or horizontal flow, it can be used both in new construction and in old plants, where a higher filtration efficiency is required. Available versions BNN: panel filter thickness 48 mm or 98 mm BNT: prefilter thickness 48 mm + rigid bag filter (max. depth 535 mm) BNC: prefilter thickness 48 mm + absolute filter depth 292 mm BNP ◻ : prefilter thickness 48 mm + activated carbon cartridges BTC: prefilter thickness 48 mm + rigid bag filter + absolute filter depth 292 mm BTP ◻ : prefilter thickness 48 mm + rigid bag filter + activated carbon cartridges Special executions BN ◻ X: execution in stainless steel AISI 304 BT ◻ X: execution in stainless steel AISI 304 Material and finishing Galvanized steel sheet with connection flanges, pre-drilled on the air entry and exit side. Inspection doors locked by handles equipped with neoprene seal gasket. Housing for prefilters thickness 48 mm, realized with “U” guide for lateral installation. Housing for bag filters or absolute filters, complete with a quick locking device through sliding profile. Galvanized steel supporting plate for activated carbon cartridges. Applications and limit of use Air duct filtration. FCR S.p.A. Via E. Fermi, 3 • 20092 Cinisello Balsamo (MI) Phone • +39 02 61798 1 | e-Mail • [email protected] Web • www.fcr.it