Duct housings series UNI-BOX model BNT pag. E-1 Description Duct housing for bag filters and prefilters. It is equipped with two housings: one for filters with thickness 48 mm, for example of the series PRE-FIL, and one for rigid or synthetic bag filters, for example of the series MULTI-PAK or SAFE-PAK. Thanks to its modularity and easy installation, which can be with vertical or horizontal flow, it can be used both in new construction and in old plants, where a higher filtration efficiency is required. Construction Galvanised steel sheet with connection flanges, predrilled on the air entry and exit side. Inspection doors locked by handles equipped with neoprene seal gasket. Housing for prefilters thickness 48 mm, realized with “U” guide for lateral installation. Housing for bag filters (maximum depth 535 mm), complete with a quick locking device through sliding profile. Filters Prefilters with thickness 48 mm can be installed in the apposite U guide, and they have the sizes 592x592 mm or 592x287 mm, in series rigid or synthetic bag filters with the sizes 592x592 mm and 592x287 mm with maximum depth 535 mm. Applications Air duct filtration. Special executions BNT-X : stainless steel AISI 304 execution. Duct housings series UNI-BOX model BNT pag. E-1 M mass filters excluded F.C.R. SpA - Via E. Fermi, 3 - 20092 Cinisello Balsamo (MI) - Italy phone +39 02 61798 1 - fax +39 02 61798 300 - www.fcr.it - [email protected]