BOARD/WIRE-TO-BOARD CONNECTORS Minitek® Pwr 4.2 OVERVIEW Minitek® Pwr 4.2 connectors are designed for power application with current rating up to 9A per circuit, available for dual row and 2 to 24 circuits, for Wire-ToBoard, Wire-To-Wire, and Wire-To-Panel mount application. Crimp, snap-in header and receptacle contacts are used to terminate 28AWG-16AWG wires. Header and receptacle housings allow Wire-To-Wire and Wire To-Board configurations. Crimping and removal tools are available for wire harness assembly. Header assemblies for Wire-To-Board in interconnections include vertical and right angle components. These wave soldering headers are available in through-hole configurations. A right angle version cable receptacle is also available. • Fully isolated terminals • Prevents terminals from potential damage during operation • Positive locking on HSG with low thumb latch operation • Prevents from unexpectedly unmating • Polarized mating geometry • Ensures header and receptacle are correctly mated • Scoop-proof housings • Ensures terminals and header pins are not damaged for angled mating • Fully polarized housings • Prevents accidental mis-mating • High retention force in HSG • Well secures terminals in housings • Low insertion force for installation of crimped terminal • Insertion tool is not required • Wire-To-Wire, Wire-To-Board and Wire-To-Panel connectors with 4.2mm centerline • Flexible applications in various situations • Available in UL94V-0 flammability rated nylon • High flammability rating • Vertical and right-angle PCB headers for wave soldering application • Supports various 1.6mm PCB applications • Interchangeable and compatible with Molex Micro-Fit™ • Intermateable with Molex parts • RoHS compliance and Lead-Free • Meet environmental, health and safety requirements • Special right-angle type receptacle • Ideal for cable routing within 1U or 2U equipment systems • Glow Wire Compliant series available • Supports home appliances requi

TECHNICAL INFORMATION MATERIALS • Contact for Board Header Connector: Brass with optional Tin and Gold Flash plating • Housing: Nylon 66 & LCP, Natural & Black, UL94V-0 • Terminal for Crimping: Brass/ Phosphorus Bronze with optional Tin and Gold Flash plating ELECTRICAL PERFORMANCES • Terminal: Reel • Low Level Contact Resistance: 10mΩ max. TARGET MARKETS/APPLICATIONS • WiMax Box • Display System • Dielectric Withstand Voltage: 1500 VAC • Industrial & Instrumentation • Multi-service Station • Display System • Electrical Lighting • Include 30ºC terminal temperature rise at rated current MECHANICAL...