MT series
1 / 12Pages

FCI MT100 Series Multipoint Thermal Mass Flow Meters Advanced Air and Gas Flow Metering Solutions for Large Diameter Pipes, Stacks and Ducts Combustion Air Primary, Secondary, Overfire Air Preheated Air Boiler Air Feed Emissions Monitoring (CEMS, CERMS, AMS per EN 15267, QAL1) Industrial and Plant HVAC Control Flue Gases Stack Gases

MT100 Series – Air and Gas Flow Meter Solutions Designed for Large Pipe and Duct Applications Large diameter pipes and ducts present unique challenges to achieve successful flow meter installation and performance. Lack of straight-run, distorted flow profiles, low flow rates and wide turndowns rates are common performance challenges for many flow metering technologies. Installations can be complicated by difficult access points, single plane platforms, long cable runs, extra mechanical support and exposure to weather extremes. Further, in many applications, the gas being measured can be...

and functions to meet USA EPA CEMS requirements and European AMS Compliance per EN 1527 with QAL1. Your investment in an MT100 Series flow meter is completed with FCI’s precision calibration. Calibration is performed in FCI’s worldclass flow calibration laboratory using equipment traceable to NIST (US National Institute of Standards and Technology) and ISO/IEC 17025 international standards for test lab quality systems. Calibrations are matched to your gas and process conditions resulting in best possible installation accuracy and repeatability for your installation. MT100 Outputs and Bus...

In-Situ Calibration Validation Self-Test CEMS, CERMS, and AMS/QAL1 Compliance Options Standard with all MT100 Series flow meters is a calibration self-test feature. To save time and expense, the self-test is performed in-situ and there is never a need for the MT100 to be removed or retracted from process piping or to suspend the processes operation. This self-test feature initiates a 3-point calibration and electronic drift self-test for each sensor point in the system. The three points represent a low-range, mid-range and high-range point to provide a thorough check across the span of the...

Best-in-Class Operator's Display / Readout The MT100 readout is a touch-screen, backlit, color LCD that provides the operator with comprehensive information about the process and status of the flow meter. It provides a digital value of the flow rate, total flow, process temperature in user's selected engineering unit. A 0-100% bar graph of flow rate is continuously displayed. A large strip chart of the flow rate provides the operator with an immediate indication of the process performance over time. Also included is alarm status indication. In the field at the top of the display is a user...

Weather-proof, rugged stainless steel electronics enclosure — NEMA 4X, IP66 Rated Extensive choice of outputs to interface with any system — Dual 4-20 mA — 0-1 kHz or 0-10 kHz frequency or pulse — HART — Modbus — Foundation Fieldbus — PROFIBUS — USB port — Ethernet — Dual relays (with CEMS or AMS/QAL1 option) Precision calibration of air, gas or mixed gas compositions at conditions — Calibration equipment traceable to NIST and ISO 17025 — Up to five (5) unique calibrations per instrument 2 ″ male NPT or 2 ″ [DN50] or larger flanged Informational, touch-type color LCD — Digital readout of...

MT100 Series Specifications Instrument g Measuring Capability Multipoint, averaging flow rate system for air and gases in large diameter pipes and rectangular ducts; provides flow rate, totalized flow, temperature Basic Style MT100M Insertion with two or more sense points on one or more mast-type flow element probes; minimum of two (2) points per mast; maximum of eight (8) points on single mast MT100S Insertion with up to 8 single-point flow elements Flow Measurement Range MT100M 0.25 SFPS to 150 SFPS [0,07 NMPS to 46 NMPS] MT100S 0.25 SFPS to 1000 SFPS [0,07 NMPS to 305 NMPS] Air at...

MT100 Specifications Cont’d Transmitter/Electronics g Operating Temperature -40 °F to 150 °F [-40 °C to 65 °C] Display/Readout -4 °F [-20 °C] Input Power DC 24 Vdc (19.2 V to 28.8 Vdc) 4 points, up to 17 watt maximum; up to 8 points, 26 watt maximum AC 85 V to 265 Vac 4 points, up to 29 watt maximum; up to 8 points, 43 watt maximum Outputs Standard: Two 4-20 mA analog outputs 1 with NAMUR NE43 guidelines; output #1 with HART 2, 3; one 0-1 kHz frequency/pulse; Modbus 485 3 ; USB port; ethernet service port Optional: Foundation Fieldbus H1 3, PROFIBUS-PA 3 1 2 3 CEMS and AMS/QAL1 Compliance...

Model MT100 Multipoint Thermal Mass Flow Meter MT100 Series Transmitter Enclosure MT100 M Flow Element Assembly 2 Inch NPT Process Connection Flange Process Connection Duct Flange Process Connection

Model MT100 Multipoint Thermal Mass Flow Meter MT100 S Flow Element Assembly Compression Fitting Process Connection Flange Optional Low Pressure Retractable Packing Gland Process Connection Flange Optional

Model MT100 Multipoint Thermal Mass Flow Meter Medium Pressure Retractable Packing Gland Process Connection Flange Optional Fixed 1 Inch NPT Process Connection Fixed Flange Process Connection

FCI’s World Class Calibration Ensures Installed Accuracy All FCI products are tested and calibrated to rigorous standards to ensure you get the instrument that does the job you specified. To design and produce the highest quality flow instrumentation, FCI operates a world-class flow calibration laboratory with calibrations performed on more than 19 different flow stands, using equipment traceable to NIST (US National Institute of Standards and Technology), and ISO/IEC 17025 (International Standards for test lab quality systems). More than 19 precision flow stands to match process...