Clip removing and Cutting Machine TDSAL automatic machine for clip removing and / or cutting in half, 45° or 90° angle, for cooked and cured products. A loading conveyor, working in step and controlled by a brushless motor, allows the precise positioning of the products in the clip removing station. The two de-clipping heads lean against the product, centering it transversally and acting in order to optimize the aesthetic result after the removal of the clips, with the least possible product removal. The products are then transferred to the cutting device, which divides them into two parts of approximately equal length and/or equal weight, depending on the characteristics of the product, and transfers them onto a conveyor belt, which can be customized, for transfer to subsequent processes.

The clip removing heads and the cutting unit are equipped with easily replaceable parts to adapt to product sizes and achieve the desired result even with partially retracted clips. Product's dimensions vary from 30mm to 90mm in diameter and from 250mm to 600mm in length. Depending on the model productivity varies from 15 to 30 pieces/1' and the machine can be equipped with an automatic loader. Machines for clip removing only are available with 1, 2, or 4 units, with productivity ranging from 18 to 60 pieces/min. These models can be equipped with an automatic loading device and an automatic feeding...