Specifications:
The document outlines the specifications for the Series 16GPT planetary gearheads, designed for high torque applications. The gearheads offer a continuous torque of up to 0.6 Nm and can operate at speeds up to 20,000 min-¹. Reduction ratios are available from 3.3:1 to 1,437:1, with exact values accessible upon request.

Performance Parameters:
Continuous output torque for a 50:1 reduction ratio is limited to 0.28 Nm. Input speeds for reduction ratios of 11:1 and 54:1 are capped at 14,000 min-¹ and 17,000 min-¹, respectively. The gearheads are efficient, with a maximum efficiency of 90% for a single gear stage.

Mechanical Properties:
The gearheads are constructed from stainless steel, with ball bearings on the output shaft. They can operate within a temperature range of -30°C to +120°C. The maximum radial shaft load is 90 N, and the axial load is 30 N.

Dimensional Information:
The length without motor varies from 15.4 mm to 29.4 mm depending on the number of gear stages. The mass without motor and flange ranges from 17.5 g to 33.5 g.

Options and Customization:
Various options are available, including different output shaft configurations and cable orientations. The gearheads can be customized for low temperature and vacuum conditions.

Usage Recommendations:
The document includes a diagram recommending operational areas for continuous use, indicating the relationship between output speed and torque at an ambient temperature of 22°C. The gearheads are intended for use with motors mounted.

Additional Notes:
Specifications are subject to change without notice, and users are advised to refer to the "Technical Information" for detailed data and lifetime performance insights.