DC-Micromotors Precious Metal Commutation 1 Nominal voltage Un Rated values for continuous operation Rated values are calculated with nominal voltage and at a 22°C ambient temperature. The Rh2 value has been reduced by 0%. Note: The diagram indicates the recommended speed in relation to the available torque at the output shaft for a given ambient temperature of 22°C. The diagram shows the motor in a completely insulated as well as thermally coupled condition (Rth2 50% reduced). The nominal voltage (Un) curve shows the operating point at nominal voltage in the insulated and thermally coupled condition. Any points of operation above the curve at nominal voltage will require a higher operating voltage. Any points below the nominal voltage curve will require less voltage. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to "Technical Information". Specifications subject to change without notice.

Dimensional drawing Encoder combination Encoder combination Bearing Temperature range Bearing lubrication Second shaft end Motor with rear end shaft for combination with Encoder PA2-100 Motor with rear end shaft for combination with Encoder HEM3 Front ball bearing Extended temperature range (-30…+125°C) For vacuum of 10-5 Pa @ 22°C Ø 1 mm x 4,5 mm Product combination Precision Gearheads / Lead Screws Drive Electronics Cables / Accessories To view our large range of accessory parts, please refer to the “Accessories” chapter. For notes on technical data and lifetime performance refer to “Technical...