Aviation
9Pages

PRODUCT CATALOGUE Products for Aviation Applications

Flat Sealed Elements FAUDI Aviation GmbH Scharnhorststrasse 7 B D-35260 Stadtallendorf Germany DS-Torques-EN_2-5 Phone: +49 6428 4465-275 Fax: +49 6428 4465-231 E-Mail: contact@faudi-aviation.com Web: www.faudi-aviation.com Page SERVICE & MAINTENANCE

SERVICE & MAINTENANCE Torques for Elements Screw Based Elements FAUDI Aviation GmbH Scharnhorststrasse 7 B D-35260 Stadtallendorf Germany DS-Torques-EN_2-5 Phone: +49 6428 4465-275 Fax: +49 6428 4465-231 E-Mail: contact@faudi-aviation.com Web: www.faudi-aviation.com Page

Separator Elements of Filter Water Separators FW6- & FW6-T-Series Screw Bolt FAUDI Aviation GmbH Scharnhorststrasse 7 B D-35260 Stadtallendorf Germany DS-Torques-EN_2-5 Phone: +49 6428 4465-275 Fax: +49 6428 4465-231 E-Mail: contact@faudi-aviation.com Web: www.faudi-aviation.com Seite SERVICE & MAINTENANCE

SERVICE & MAINTENANCE Torques for Elements Separator Elements of Filter Water Separators FWE- & FWE-T-Series Vessel Type FWE- / FWE-TFWE- / FWE-TFWE- / FWE-TFWE- / FWE-TFWE- / FWE-TFWE- / FWE-TFWE- / FWE-TFWE- / FWE-TFWE- / FWE-T- FAUDI Aviation GmbH Scharnhorststrasse 7 B D-35260 Stadtallendorf Germany DS-Torques-EN_2-5 Phone: +49 6428 4465-275 Fax: +49 6428 4465-231 E-Mail: contact@faudi-aviation.com Web: www.faudi-aviation.com Page

Spherical knob for torque adjustment SERVICE & MAINTENANCE The adjustment of the torque wrench is made at the grip by means of an extensible wrench which is pulled out at the spherical knob and distorted in the hinge. When turning this wrench, the graduation visible in the scale division moves along the engraved scale. The adjustment has been done correctly if the graduation mentioned exactly corresponds to the desired torque value readalbe at the scale. The angular wrench is then pushed in again up to the spherical knob. Thus the torque is ready for use. The tightening of the screws must...

The FAUDI Aviation Repair Kit is assembled to repair several mesh defects of FAUDI Aviation Separator elements with a teflonized surface. This Kit can be ordered with our article number 3000870. The Separator Repair Kit contains 50 ml Adhesive Araldit 2012 With Adhesive handgun Araldit 2000 Static mixer tubes Bottle for 50 ml Acetone** Cleaning tissue Teflonized mesh made from stainless steel Spatula Pairs of Safety gloves Sand paper ** Acetone should be bought by the end user due to transport regulations FAUDI Aviation GmbH Scharnhorststrasse 7 B D-35260 Stadtallendorf Germany...

SERVICE & MAINTENANCE Inspection & Maintenance Instructions for teflonized Separator Elements 1. Removal for inspection At every change of coalescer elements, we recommend that the separator element(s) be removed from the filter water separator and tested. The green coating of the screen must not be touched with the bare hands! Use clean gloves or a sheet of plastic between your hands and the screen! 2. Inspection elements for soiling or damage Inspect the green coating for soiling by dirt, sludge, etc., and for nicks, cuts and other flaws. If the element appears clean and undamaged, test...

SERVICE & MAINTENANCE Inspection & Maintenance Instructions for teflonized Separator Elements 4. Evaluation of proper function It will adhere to the screen and seep into the pores. The element has not passed the water repellance test and must be cleaned and dried as detailed under intem 5. If water penetration is due not to soiling but to mechanical damage such as holes, cuts or areas where the coating is scraped away, please see item 6. If, after repeated cleaning the element continues to fail the water repellance test or if the screen is so badly damaged that it cannot be repaired as...