Economical and High-Quality PLC FATEK B1/B1z Series Micro-Programmable Controllers

Be impressed with the high quality ! Features Core Technology of the Advanced SoC With advanced software, hardware techniques and over 20 years experience in the automation industry, FATEK has integrated its own SoC CPU (Systems on Chip), hardware logic solver (HLS), hardware high-speed counter/timer, NC positioning, communication, FLASH, and SRAM into a tiny BGA chip. This is an industry first making FATEK a market leader in micro PLC design! Compact and Rugged Common components are now integrated into the SoC so the processor and I/O board layer can now be manufactured on a single PCB substantially...

Competitive Low Price The streamline design of SoC technology significantly reduces the hardware costs. The B1/B1z series PLC incorporates the most sophisticated manufacturing process and high quality two-layer board design. This makes the B1/B1z PLC very price-competitive in today’s cost conscience PLC market! Easy to Use, Common Instruction Sets The B1/B1z series PLC is an economic type PLC without any compromise to its performance. It also provides all the easy to use yet powerful FBs series PLC’s instructions. Both B1/B1z and FBs series PLC are programmed by the same utility software - Winproladder....

System Configuration Bar-code Reader Handheld Programming General Purpose FiFID Card Left Side Expansion Modules : FEs-DAP cannot apply to Biz units

FATEK The Brand You Can Rely On Right Side Expansion Modules

General Specifications Environmental Specifications Item Specification Minimum Open space Enclosure space Operating ambient temperature Permanent installation Storage temperature Relative humidity (non-condensing, RH-2) Pollution resistance Corrosion resistance ≤2000m 0.5G, 2 hours for each direction of 3 axes Vibration resistance 2G, 2 hours for each direction of 3 axes Shock resistance 10G, three times for each direction of 3 axes Noise resistance Withstand voltage AC Model Power Specifications Item Specification 10 Points Main Unit 14 Points Main Unit 20 Points Main Unit 24 Points Main Unit...

Functional Specifications *1 : Default, changeable by user *2 : Analog expansion module will occupy Port1 (continue) Item Retentive Special relay Can be configured as retentive type Can be configured as non-retentive type Step relay Timer “Time-Up” status contact Counter “Count-Up” status contact S20 ~ S499 can be configured as retentive type Can be configured as non-retentive type Can be configured as non-retentive type Can be configured as retentive type Can be configured as non-retentive type Can be configured as retentive type Can be configured as non-retentive type Can be configured as retentive...

(continue) Item Specification Points Maximum 24 points (All inputs in main unit come with this feature) Capture input > 47μS(for high speed input) Minimum capturable pulse width > 470μS(for medium speed input) Chosen by frequency at high frequency Chosen by time constant at low frequency Adjustable frequency 14KHz~1.8MHz X0~X15 Adjustable time constant 0~1.5mS/0~15mS(unit: 0.1mS/1mS) Time constant 1~15mS adjustable(unit: 1mS) Digital Input (DI) Specifications Item High speed Maximum input frequency* Medium speed Input signal voltage ON Threshold current Maximum input current * : Half of maximum...

Digital Output (DO) Specifications Item Single-end transistor output (T,J models) Maximum output frequency* Working voltage Maximum load current Single-end relay output Maximum voltage drop/ conducting resistance Minimum load Leakage current Maximum output delay time 10mS Displayed by LED: light when "ON", dark when "OFF" Output status indication Isolation method Optical isolation, 500VAC, 1 minute Electromagnetic isolation, 1500VAC, 1 minute SINK/SOURCE output type T models (SINK); J models (SOURCE) Can be arbitrarily set to SINK/SOURCE output * : Half of the maximum frequency while A/B phase...

Model Specifications B1 Main Units Model Digital input High speed 50KHz Medium speed (Total 5KHz) 6 points (4-axis single phase or 3-axis A/B phase) 4 points (4-axis single phase or 2-axis A/B phase) 4 points 2 points(1-axis single phase or A/B phase) 2 points(1-axis single phase or A/B phase) 4 points(2-axis single phase or A/B phase) Relay Digital output Transistor (5~30 VDC) 1 port (RS232 or USB*1) / 2 ports (RS232 + RS485) for B1-xxM 25 2 ports (except B1-xxM 25) Special order ZPOW14(AC power) or N/A(DC power) 5mm European fixed terminal block Figure 1 (Standard), Figure 2 (Slim)*2 Figure...

Model Specifications B1z Main Units Model Digital input High speed 50KHz Medium speed (Total 5KHz) 8 points (4-axis single phase or A/B phase) 6 points 4 points(2-axis single phase or A/B phase) 6 points(3-axis single phase or A/B phase) 6 points(3-axis single phase or A/B phase) Relay Digital output Communication Port Built-in Expandable 1 port (RS232 or USB*1) N/A N/A ZPOW14(AC power) or N/A(DC power) Calendar Built-in power supply Wiring mechanism Dimension 5mm European fixed terminal block Figure 5 (Standard), Figure 6 (Slim)*2 Figure 3 (Standard), Figure 4 (Slim)*2 *1 Special order *2 AC...

Left Side Communication Expansion Modules Model 1 RS232 port (Port 2) with TX, RX indicators 2 RS232 ports (Port 1, 2) with TX, RX indicators 1 RS485 port (Port 2) with TX, RX indicators 2 RS485 port (Port 1, 2) with TX, RX indicators 1 RS232 port (Port 1) + 1 RS485 port (Port 2) with TX, RX indicators Wiring mechanism DB9F 3.5mm spring terminal block 3.5mm spring terminal block Figure 9 (Standard), Figure 10 (Slim) ZigBee™ Communication Module (continue) Model Network interface Network protocol Application protocol FATEK client and server mode, Modbus-TCP server mode Network topology Mesh, star,...

Dimensions Figure 1 Standard PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER

Dimensions Figure 7 Standard