FATECH Tset device FC-2G for testing of Metal Oxide varistor (MOV) & gas discharge tube (GDT)

Product catalog summary

Application:
This document outlines the application for testing metal oxide varistors (zinc oxide varistor surge arresters), metal ceramic diodes, or gas discharge tubes.

Characteristics:

Measures key parameters of limiting breakdown and overvoltage ignition components.
Initial action voltage can be preset and is continuously adjustable from 20V to 1600V.
Features an LCD digital display for accuracy, reliability, and clarity.
Automatically provides an accurate 1mA constant current and voltage of 0.75U1mA when testing varistors.
For gas discharge tube tests, the test voltage increases linearly at a rate of 100V/S.
Allows for continuous measurement for bulk sample testing.
Includes high short-circuit protection, overcurrent protection, and self-test functions.
Features inherent discrimination and alarm test functions for voltages between 190V and 260V.

Technical Parameters:

Initial Action Voltage (U1mA):
- Test Range: 0~100V with a maximum tolerance of +/- (2V + 1 d).
- Test Range: 101~1700V with a maximum tolerance of +/- (2%RDG + 1 d).
- Test Conditions: 1000+/- 5 Ua.
Leakage Current (I 0.75U1mA):
- Test Range: 0.1 ~ 199.9uA with a maximum tolerance of +/- 2uA + 1 d.
- Test Conditions: 0.75U1mA.
DC Breakdown Voltage (Vsdc):
- Test Range: 20~1700V with a maximum tolerance of +/- (2%RDG + 1 d).
Voltage Increase Rate:
- 100+/-8 V/S.
Discharge Voltage Memorize Display Time:
- 1.5~3.5 seconds.

Catalog excerpts

FATECH Tset device FC-2G for testing of Metal Oxide varistor (MOV) & gas discharge tube (GDT)-1

Application: adapt for testing of metal oxide varistor (zinc oxide varistor surge arrester), metal ceramic diode or gas discharge tube. Characteristic: It can used to measure limiting breakdown, overvoltage ignition components key parameters Can be pre-set initial action voltage, 20V ~ 1600V continuously adjustable LCD digital display, accuracy, reliability, intuitive and clear. When varistors tested to automatically give an accurate 1mA constant current and voltage 0.75U1mA When the gas discharge tube test, the test voltage to 100V / S rate rises linearly Select the continuous measurement can be carried out continuously for bulk sample testing With high short-circuit protection, overcurrent protection, self-test functions With 190V ~ 260V inherent discrimination, alarm test function Technical Parameter Test Rang Test Conditions Initial Action Technical Parameter Test Rang Test Conditions Voltage increase rate (100+/-8) Discharge voltage memorize disply time

Open the catalog to page 1