- Catalogs
- FATECH ELECTRONIC (FOSHAN) CO., LTD
- FATECH surge protector FV20C/2+NPE-xxx PVS for solar photovoltaic system
FATECH surge protector FV20C/2+NPE-xxx PVS for solar photovoltaic system
1 / 1 PageView full catalog
FATECH surge protector FV20C/2+NPE-xxx PVS for solar photovoltaic system
Product catalog summary
Specifications:
The document outlines the specifications for a DC surge protective device used in photovoltaic systems. It includes details on remote control contact, signal access range, and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm.
Model Information:
Models include FV20C/2+NPE-500PV(S), 600PV(S), 800PV(S), and 1000PV(S). If the model number lacks an 'S', it does not have a remote control contact function.
Test Class and Network Type:
The device complies with IEC/EN/VDE Class II/C standards and is designed for photovoltaic systems. It supports various protection modes and nominal voltages ranging from 500V to 1000V DC.
Performance Parameters:
The maximum discharge current is 40kA, with a nominal discharge current of 20kA. The voltage protective level varies from ≤2.0kV to ≤3.6kV, and the response time is ≤25ns. A recommended back-up fuse of 125A is suggested.
Physical and Environmental Specifications:
The device features a mechanical disconnection indicator and optional remote control contact. It operates within a temperature range of -40℃ to +80℃, humidity of 30% to 90%, and up to an altitude of 3000m. It has an IP20 protection degree and is made from UL94 V-0 housing material.
Additional Features:
The device includes a reliable control mechanism with a Thermo Dynamic Control disconnector and optional remote signaling contact. Faults are indicated via a red mark in the inspection window. It is a 3-pole, Y-type device.
Installation:
The device is mounted on a 35mm symmetrical rail (EN50022/DIN46277-3) and supports multi-core wire connections ranging from 4mm to 25mm.
The document outlines the specifications for a DC surge protective device used in photovoltaic systems. It includes details on remote control contact, signal access range, and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm.
Model Information:
Models include FV20C/2+NPE-500PV(S), 600PV(S), 800PV(S), and 1000PV(S). If the model number lacks an 'S', it does not have a remote control contact function.
Test Class and Network Type:
The device complies with IEC/EN/VDE Class II/C standards and is designed for photovoltaic systems. It supports various protection modes and nominal voltages ranging from 500V to 1000V DC.
Performance Parameters:
The maximum discharge current is 40kA, with a nominal discharge current of 20kA. The voltage protective level varies from ≤2.0kV to ≤3.6kV, and the response time is ≤25ns. A recommended back-up fuse of 125A is suggested.
Physical and Environmental Specifications:
The device features a mechanical disconnection indicator and optional remote control contact. It operates within a temperature range of -40℃ to +80℃, humidity of 30% to 90%, and up to an altitude of 3000m. It has an IP20 protection degree and is made from UL94 V-0 housing material.
Additional Features:
The device includes a reliable control mechanism with a Thermo Dynamic Control disconnector and optional remote signaling contact. Faults are indicated via a red mark in the inspection window. It is a 3-pole, Y-type device.
Installation:
The device is mounted on a 35mm symmetrical rail (EN50022/DIN46277-3) and supports multi-core wire connections ranging from 4mm to 25mm.
See more
Catalog excerpts
Surge Protective Device for Photovoltaic System ♦ DC surge protective device used for photovoltaic system. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ With Reliable control thanks to Thermo Dynamic Control disconnector. ♦ Remote signaling contact for control device optional. ♦ Fault indication via red mark in the inspection window. ♦ 3 poles, Y type.
Open the catalog to page 1All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures
FV12.5B+C/4-2753 Pages
FV12.5B+C/2-2753 Pages
FV25B+C/3-1000PV3 Pages
FV30B+C/3-1000PVS 36mm2 Pages
FV30B+C/3-1000PVS 18mm3 Pages
FVC10D/2-48PVS2 Pages
iSPD4 Pages
iSPD-M4 Pages
FV30B+C/4-440S3 Pages
FA-SMA-5G 10-K F-F positive2 Pages
FA-SMA-5G-10-K M-F positive2 Pages
FLP03-320-S/G2 Pages
FLP03-275-S/G2 Pages
FLP03-275-P/G2 Pages
FLP03-24-P/G2 Pages
FV30B+C/3+NPE-4201 Page
FV25B/3+NPE-440S1 Page
FV12.5B+C/3-1000PV1 Page
FV12.5B+C/3-500PV1 Page
FV50B/3+NPE-255S1 Page
FV03D/2-25PVL1 Page
FV30B+C/41 Page
FV10D/21 Page
FV40C/3+NPE1 Page
FV25B/4-***S1 Page
FV25B/3-***PV（S）1 Page
FLRC-S/II1 Page
FV20C/2-***PV（S）1 Page
FS-RJ45D/PoE-***1 Page
FLP10-***i-*/BG1 Page
FV25B/3-1000PVS2 Pages
FLRC-D1 Page
FV50B/1 -***（S）1 Page
FV30B+C1 Page
FLRC-L1 Page
FLRC-S/D1 Page
FV20C1 Page
FV25B/3-600 PVS1 Page
FS-RJ45D/POE-1001 Page
FV20C/31 Page
FV50B/1-xxx S series1 Page
Related Searches
- Surge protector
- DIN rail lightning arrester
- Class II surge protector
- Automatic tester
- Generator
- Industrial tester
- Power supply lightning arrester
- Low-voltage lightning arrester
- Voltage testing system
- Class II surge arrester
- AC surge arrester
- Multipole surge arrester
- Plug-in lightning arrester
- Type 1 surge protector
- Digital counter
- Installation tester
- Remote signaling surge arrester
- Varistor surge arrester
- Compact surge suppressor
- Surge arrester with fault indication
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.