- Catalogs
- FATECH ELECTRONIC (FOSHAN) CO., LTD
- FATECH surge arrester FV50B/1-275 for class 1 power protection
FATECH surge arrester FV50B/1-275 for class 1 power protection
1 / 1 PageView full catalog
FATECH surge arrester FV50B/1-275 for class 1 power protection
Product catalog summary
Specifications:
The document outlines the specifications for a surge protective device designed for low-voltage power systems. It includes details on remote control contact, signal access range, and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm. Models without 'S' do not have remote control contact functionality.
The document outlines the specifications for a surge protective device designed for low-voltage power systems. It includes details on remote control contact, signal access range, and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm. Models without 'S' do not have remote control contact functionality.
Model Information:
The models listed are FV50B/1-150(S), FV50B/1-255(S), FV50B/1-275(S), FV50B/1-320(S), and FV50B/1-385(S). They are tested under IEC/EN/VDE Class I/B and are suitable for TT, TN, and IT network types. The protection mode is L/N-PE, with nominal voltages ranging from 110V to 220V and rated voltages (UC) from 150V to 385V.
The models listed are FV50B/1-150(S), FV50B/1-255(S), FV50B/1-275(S), FV50B/1-320(S), and FV50B/1-385(S). They are tested under IEC/EN/VDE Class I/B and are suitable for TT, TN, and IT network types. The protection mode is L/N-PE, with nominal voltages ranging from 110V to 220V and rated voltages (UC) from 150V to 385V.
Performance Parameters:
The device can handle an impulse current of 50kA (10/350μs) and a nominal discharge current of 50kA (8/20μs). The voltage protective level (Up) is ≤1.8kV for most models, with a response time (tA) of ≤100ns. A recommended back-up fuse of 500A is suggested, and the isolation resistance is greater than 10 MΩ.
The device can handle an impulse current of 50kA (10/350μs) and a nominal discharge current of 50kA (8/20μs). The voltage protective level (Up) is ≤1.8kV for most models, with a response time (tA) of ≤100ns. A recommended back-up fuse of 500A is suggested, and the isolation resistance is greater than 10 MΩ.
Installation and Operation:
The device is mounted on a 35mm symmetrical rail (EN50022/DIN46277-3) and operates within a temperature range of -40℃ to +80℃, with humidity levels between 30% and 90%, and up to an altitude of 3000m. It has a degree of protection rated at IP20, and the housing material is UL94 V-0. A mechanical indicator shows the device status (Green: OK, Red: replace), and remote control contact is optional.
The device is mounted on a 35mm symmetrical rail (EN50022/DIN46277-3) and operates within a temperature range of -40℃ to +80℃, with humidity levels between 30% and 90%, and up to an altitude of 3000m. It has a degree of protection rated at IP20, and the housing material is UL94 V-0. A mechanical indicator shows the device status (Green: OK, Red: replace), and remote control contact is optional.
Design and Application:
The device features a unique seal construction with a multilayer spark gap, ensuring no spark emission outside the housing. It includes a working status indication window and is mainly used in lightning protection zones (LPZ) 0 to 1, suitable for building entrance lines, elevators, and mineral applications.
The device features a unique seal construction with a multilayer spark gap, ensuring no spark emission outside the housing. It includes a working status indication window and is mainly used in lightning protection zones (LPZ) 0 to 1, suitable for building entrance lines, elevators, and mineral applications.
See more
Catalog excerpts
Surge Protective Device for Low-voltage Power System ♦ Adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. ♦ With working status indication window, and remote control contacts. ♦ Max.continuos operating voltage(Uc)150V~,255V~, 275V~,320V~,385V~ for your option. ♦ Mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines elevator, mineral, and so on. ♦ 1 pole. Remark: if the model number is without“S”, the model is without remote control contact function
Open the catalog to page 1All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures
FV12.5B+C/4-2753 Pages
FV12.5B+C/2-2753 Pages
FV25B+C/3-1000PV3 Pages
FV30B+C/3-1000PVS 36mm2 Pages
FV30B+C/3-1000PVS 18mm3 Pages
FVC10D/2-48PVS2 Pages
iSPD4 Pages
iSPD-M4 Pages
FV30B+C/4-440S3 Pages
FA-SMA-5G 10-K F-F positive2 Pages
FA-SMA-5G-10-K M-F positive2 Pages
FLP03-320-S/G2 Pages
FLP03-275-S/G2 Pages
FLP03-275-P/G2 Pages
FLP03-24-P/G2 Pages
FV30B+C/3+NPE-4201 Page
FV25B/3+NPE-440S1 Page
FV12.5B+C/3-1000PV1 Page
FV12.5B+C/3-500PV1 Page
FV50B/3+NPE-255S1 Page
FV03D/2-25PVL1 Page
FV30B+C/41 Page
FV10D/21 Page
FV40C/3+NPE1 Page
FV25B/4-***S1 Page
FV25B/3-***PV（S）1 Page
FLRC-S/II1 Page
FV20C/2-***PV（S）1 Page
FS-RJ45D/PoE-***1 Page
FLP10-***i-*/BG1 Page
FV25B/3-1000PVS2 Pages
FLRC-D1 Page
FV50B/1 -***（S）1 Page
FV30B+C1 Page
FLRC-L1 Page
FLRC-S/D1 Page
FV20C1 Page
FV25B/3-600 PVS1 Page
FS-RJ45D/POE-1001 Page
FV20C/31 Page
FV50B/1-xxx S series1 Page
Related Searches
- Surge protector
- DIN rail lightning arrester
- Class II surge protector
- Automatic tester
- Generator
- Industrial tester
- Power supply lightning arrester
- Low-voltage lightning arrester
- Voltage testing system
- Class II surge arrester
- AC surge arrester
- Multipole surge arrester
- Plug-in lightning arrester
- Type 1 surge protector
- Digital counter
- Installation tester
- Remote signaling surge arrester
- Varistor surge arrester
- Compact surge suppressor
- Surge arrester with fault indication
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.