- Catalogs
- FATECH ELECTRONIC (FOSHAN) CO., LTD
- FATECH surge arrester FV30C/1+NPE-275 for ac 1 phase power supply
FATECH surge arrester FV30C/1+NPE-275 for ac 1 phase power supply
1 / 1 PageView full catalog
FATECH surge arrester FV30C/1+NPE-275 for ac 1 phase power supply
Product catalog summary
Specifications:
The document outlines the specifications for remote control contact in surge protective devices. It specifies the range of signal access and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm. Models without 'S' do not have remote control contact functionality.
The document outlines the specifications for remote control contact in surge protective devices. It specifies the range of signal access and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm. Models without 'S' do not have remote control contact functionality.
Model Information:
The models listed include FV30C/1+NPE-150(S), FV30C/1+NPE-275(S), FV30C/1+NPE-320(S), FV30C/1+NPE-385(S), and FV30C/1+NPE-440(S). These models are tested under IEC/EN/VDE Class II/C and are suitable for TT network types with protection modes L-N and N-PE.
The models listed include FV30C/1+NPE-150(S), FV30C/1+NPE-275(S), FV30C/1+NPE-320(S), FV30C/1+NPE-385(S), and FV30C/1+NPE-440(S). These models are tested under IEC/EN/VDE Class II/C and are suitable for TT network types with protection modes L-N and N-PE.
Electrical Characteristics:
Nominal voltage is specified at 50(60)Hz with various rated voltages (UC) ranging from 150V to 440V. The maximum discharge current (Imax) is 60kA or 50kA, and the nominal discharge current (In) is 30kA or 25kA. Voltage protective levels (Up) vary for L-N and N-PE connections, with response times of ≤25ns for L-N and ≤100ns for N-PE.
Nominal voltage is specified at 50(60)Hz with various rated voltages (UC) ranging from 150V to 440V. The maximum discharge current (Imax) is 60kA or 50kA, and the nominal discharge current (In) is 30kA or 25kA. Voltage protective levels (Up) vary for L-N and N-PE connections, with response times of ≤25ns for L-N and ≤100ns for N-PE.
Installation and Operation:
Recommended back-up fuse is 125A, with isolation resistance greater than 10 MΩ. I/O connections require multi-core wire ranging from 4mm to 25mm. The device mounts on a 35mm symmetrical rail (EN50022/DIN46277-3) and operates within a temperature range of -40℃ to +80℃, humidity of 30% to 90%, and altitude up to 3000m. The degree of protection is IP20, and the housing material is UL94 V-0.
Recommended back-up fuse is 125A, with isolation resistance greater than 10 MΩ. I/O connections require multi-core wire ranging from 4mm to 25mm. The device mounts on a 35mm symmetrical rail (EN50022/DIN46277-3) and operates within a temperature range of -40℃ to +80℃, humidity of 30% to 90%, and altitude up to 3000m. The degree of protection is IP20, and the housing material is UL94 V-0.
Additional Features:
The device includes a mechanical disconnection indicator (green for OK, red for replace) and optional remote control contact. It consists of a base part and pluggable protection modules with metal oxide varistor components for high discharge capacity. It is designed for use in lightning protection zones at boundary 1-2, offering low residual voltage and quick response. Fault indication is provided via a red mark in the inspection window.
The device includes a mechanical disconnection indicator (green for OK, red for replace) and optional remote control contact. It consists of a base part and pluggable protection modules with metal oxide varistor components for high discharge capacity. It is designed for use in lightning protection zones at boundary 1-2, offering low residual voltage and quick response. Fault indication is provided via a red mark in the inspection window.
See more
Catalog excerpts
Surge Protective Device for Low-voltage Power System ♦ Consisting of a base part and MOV + GDT pluggable protection modules. ♦ For using in the lightning protection zones concept at boundary 1-2. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ Low residual voltage and quick response. ♦ Reliable control thanks to Thermo Dynamic Control disconnector. ♦ With remote signaling contact for control device. ♦ Fault indication via red mark in the inspection window. ♦ Protection mode: L-N, N-PE.
Open the catalog to page 1All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures
FV12.5B+C/4-2753 Pages
FV12.5B+C/2-2753 Pages
FV25B+C/3-1000PV3 Pages
FV30B+C/3-1000PVS 36mm2 Pages
FV30B+C/3-1000PVS 18mm3 Pages
FVC10D/2-48PVS2 Pages
iSPD4 Pages
iSPD-M4 Pages
FV30B+C/4-440S3 Pages
FA-SMA-5G 10-K F-F positive2 Pages
FA-SMA-5G-10-K M-F positive2 Pages
FLP03-320-S/G2 Pages
FLP03-275-S/G2 Pages
FLP03-275-P/G2 Pages
FLP03-24-P/G2 Pages
FV30B+C/3+NPE-4201 Page
FV25B/3+NPE-440S1 Page
FV12.5B+C/3-1000PV1 Page
FV12.5B+C/3-500PV1 Page
FV50B/3+NPE-255S1 Page
FV03D/2-25PVL1 Page
FV30B+C/41 Page
FV10D/21 Page
FV40C/3+NPE1 Page
FV25B/4-***S1 Page
FV25B/3-***PV（S）1 Page
FLRC-S/II1 Page
FV20C/2-***PV（S）1 Page
FS-RJ45D/PoE-***1 Page
FLP10-***i-*/BG1 Page
FV25B/3-1000PVS2 Pages
FLRC-D1 Page
FV50B/1 -***（S）1 Page
FV30B+C1 Page
FLRC-L1 Page
FLRC-S/D1 Page
FV20C1 Page
FV25B/3-600 PVS1 Page
FS-RJ45D/POE-1001 Page
FV20C/31 Page
FV50B/1-xxx S series1 Page
Related Searches
- Surge protector
- DIN rail lightning arrester
- Class II surge protector
- Automatic tester
- Generator
- Industrial tester
- Power supply lightning arrester
- Low-voltage lightning arrester
- Voltage testing system
- Class II surge arrester
- AC surge arrester
- Multipole surge arrester
- Plug-in lightning arrester
- Type 1 surge protector
- Digital counter
- Installation tester
- Remote signaling surge arrester
- Varistor surge arrester
- Compact surge suppressor
- Surge arrester with fault indication
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.