*mydirectindustry

Catalogs
FATECH ELECTRONIC (FOSHAN) CO., LTD
FATECH surge arrester FV30B+C/1+NPE-275 for 60ka 1 phase protection

FATECH surge arrester FV30B+C/1+NPE-275 for 60ka 1 phase protection

Product catalog summary

Specifications:
The document outlines the specifications for remote control contact in surge protective devices. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire with a maximum diameter of 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire with a maximum diameter of 1.3mm. Models without 'S' do not have remote control contact functionality.

Model Numbers:
The models listed include FV30B+C/3+NPE-150(S), FV30B+C/3+NPE-275(S), FV30B+C/3+NPE-320(S), FV30B+C/3+NPE-385(S), and FV30B+C/3+NPE-440(S).

Test Class and Network Type:
The devices are tested under IEC/EN/VDE Class I+II/B+C and are suitable for TT network types. The protection mode is L-N and N-PE.

Electrical Characteristics:
Nominal voltage is 110/220V~ to 220/380V~ at 50(60)Hz. The rated voltage (UC) ranges from 150V~ to 440V~. Impulse current (Iimp) is 7kA, with a maximum discharge current (Imax) of 60kA and a nominal discharge current (In) of 30kA. Voltage protective levels (Up) vary from ≤0.9kV to ≤2.2kV for L-N and ≤1.5kV for N-PE. Response times are ≤25ns for L-N and ≤100ns for N-PE.

Installation and Operation:
Recommended back-up fuse is 160A, with isolation resistance greater than 10 MΩ. I/O connections use multi-core wire ranging from 4mm to 25mm. The devices are mounted on a 35mm symmetrical rail (EN50022/DIN46277-3). Operating temperature ranges from -40℃ to +80℃, with humidity between 30% and 90%, and altitude up to 3000m. The degree of protection is IP20, and the housing material is UL94 V-0.

Additional Features:
The devices include a mechanical disconnection indicator (green for OK, red for replace) and optional remote control contact. They consist of a base part and pluggable MOV + GDT protection modules, suitable for lightning protection zones at boundary 1-2. They feature metal oxide varistor components with high discharge capacity, low residual voltage, quick response, and reliable control via Thermo Dynamic Control disconnector. Fault indication is provided via a red mark in the inspection window.

Catalog excerpts

FATECH surge arrester FV30B+C/1+NPE-275 for 60ka 1 phase protection-1

Surge Protective Device for Low-voltage Power System FV30B+C/1+NPE -***(S) ♦ Consisting of a base part and MOV + GDT pluggable protection modules. ♦ For using in the lightning protection zones concept at boundary 1-2. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ Low residual voltage and quick response. ♦ Reliable control thanks to Thermo Dynamic Control disconnector. ♦ With remote signaling contact for control device. ♦ Fault indication via red mark in the inspection window. ♦ Protection mode: L-N,N-PE. Port definition of remote control contact Range of signal access Remarklif the model number is without“S”, the model is without remote control contact function

Open the catalog to page 1

All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list