1. Catalogs
  2. FATECH ELECTRONIC (FOSHAN) CO., LTD
  3. FATECH surge arrester FV20C/3-1000PV S for DC Solar protection

FATECH surge arrester FV20C/3-1000PV S for DC Solar protection

FATECH surge arrester FV20C/3-1000PV S for DC Solar protection

Product catalog summary
Specifications:
  • AC Remote Control Contact: Voltage ≤ 250V, Current ≤ 0.5A, Single core wire with max diameter ≤ 1.5mm.
  • DC Remote Control Contact: Voltage ≤ 60V, Current ≤ 0.1A, Multi-core wire with max diameter ≤ 1.3mm.
  • Model Numbers: FV20C/3-48PV(S), FV20C/3-96PV(S), FV20C/3-500PV(S), FV20C/3-600PV(S), FV20C/3-800PV(S), FV20C/3-1000PV(S), FV20C/3-1500PV(S).
  • Test Class: IEC/EN/VDE Class II/C.
  • Network Type: Photovoltaic system.
  • Protection Mode: +/- — PE, -/+ — PE, +/- — -/+.
  • Nominal Voltage: 50(60)Hz UN ranging from 48V dc to 1500V dc.
  • Rated Voltage: UCPV ranging from 75V dc to 1800V dc.
  • Max Discharge Current: Imax 40kA.
  • Nominal Discharge Current: In 20kA.
  • Voltage Protective Level: Up ranging from ≤0.6kV to ≤5.0kV.
  • Response Time: tA ≤25ns.
  • Recommended Back-up Fuse: 125A.
  • Isolation Resistance: >10 MΩ.
  • I/O Connections: Multi-core wire: 4mm ~ 25mm.
  • Mounting: 35mm Symmetrical rail (EN50022/DIN46277-3).
  • Operation Temperature Range: -40℃~+80℃.
  • Humidity: 30%~90%.
  • Altitude: 3000m.
  • Degree of Protection: IP20.
  • Housing Material: UL94 V-0.
  • Disconnection Indicator: Mechanical indicator (Green: OK, Red: replace).
  • Remote Control Contact: Optional.
Procedures and Recommendations:
  • DC surge protective device is used for photovoltaic systems.
  • The core parts are metal oxide varistor components with high discharge capacity.
  • Reliable control is ensured by Thermo Dynamic Control disconnector.
  • Remote signaling contact for control device is optional.
  • Fault indication is provided via a red mark in the inspection window.
  • Device configuration: 3 poles, Y type.
See more

Catalog excerpts

FATECH surge arrester FV20C/3-1000PV S for DC Solar protection-1

Surge Protective Device for Photovoltaic System ♦ DC surge protective device used for photovoltaic system. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ With Reliable control thanks to Thermo Dynamic Control disconnector. ♦ Remote signaling contact for control device optional. ♦ Fault indication via red mark in the inspection window. ♦ 3 poles, Y type. Remark: if the model number is without“S”, the model is without remote control contact function

 Open the catalog to page 1

All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures

  1. iSPD

    4  Pages

  2. iSPD-M

    4  Pages

  3. FLP03-320-S/G

    2  Pages

  4. FLP03-275-S/G

    2  Pages

  5. FLP03-275-P/G

    2  Pages

  6. FLP03-24-P/G

    2  Pages

  7. FV30B+C/4

    1  Page

  8. FV10D/2

    1  Page

  9. FV40C/3+NPE

    1  Page

  10. FLRC-S/II

    1  Page

  11. FLRC-D

    1  Page

  12. FV30B+C

    1  Page

  13. FLRC-L

    1  Page

  14. FLRC-S/D

    1  Page

  15. FV20C

    1  Page

  16. FV20C/3

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.