- Catalogs
- FATECH ELECTRONIC (FOSHAN) CO., LTD
- FATECH surge arrester FV20C/2+NPE-1000PV S for protection of PV solar system
FATECH surge arrester FV20C/2+NPE-1000PV S for protection of PV solar system
1 / 1 PageView full catalog
FATECH surge arrester FV20C/2+NPE-1000PV S for protection of PV solar system
Product catalog summary
Specifications:
1. Remote Control Contact: Available for models with 'S' in the model number.
2. AC Specifications: Voltage ≤ 250V max, Current ≤ 0.5A max, Single core wire with max diameter ≤ 1.5mm.
3. DC Specifications: Voltage ≤ 60V max, Current ≤ 0.1A max, Multi-core wire with max diameter ≤ 1.3mm.
4. Model Numbers: FV20C/2+NPE-500PV(S), 600PV(S), 800PV(S), 1000PV(S).
5. Test Class: IEC/EN/VDE Class II/C.
6. Network Type: Photovoltaic system.
7. Protection Mode: +/- — PE, -/+ — PE, +/- — -/+.
8. Nominal Voltage: 500V dc, 600V dc, 800V dc, 1000V dc.
9. Rated Voltage (UCPV): 560V dc, 670V dc, 825V dc, 1060V dc.
10. Max Discharge Current (Imax): 40kA.
11. Nominal Discharge Current (In): 20kA.
12. Voltage Protective Level (Up): ≤2.0kV, ≤2.5kV, ≤3.0kV, ≤3.6kV.
13. Response Time (tA): ≤25ns.
14. Recommended Back-up Fuse: 125A.
15. Isolation Resistance: >10 MΩ.
16. I/O Connections: Multi-core wire: 4mm ~ 25mm.
17. Mounting: 35mm Symmetrical rail (EN50022/DIN46277-3).
18. Operation Temperature Range: -40℃ to +80℃.
19. Humidity: 30% to 90%.
20. Altitude: Up to 3000m.
21. Degree of Protection: IP20.
22. Housing Material: UL94 V-0.
23. Disconnection Indicator: Mechanical indicator (Green: OK, Red: replace).
24. Remote Control Contact: Optional.
Procedures and Recommendations:
- The device is a DC surge protective device used for photovoltaic systems.
- Core components are metal oxide varistor components with high discharge capacity.
- Reliable control is ensured through Thermo Dynamic Control disconnector.
- Optional remote signaling contact for control device.
- Fault indication is provided via a red mark in the inspection window.
- The device is a 3-pole, Y type configuration.
1. Remote Control Contact: Available for models with 'S' in the model number.
2. AC Specifications: Voltage ≤ 250V max, Current ≤ 0.5A max, Single core wire with max diameter ≤ 1.5mm.
3. DC Specifications: Voltage ≤ 60V max, Current ≤ 0.1A max, Multi-core wire with max diameter ≤ 1.3mm.
4. Model Numbers: FV20C/2+NPE-500PV(S), 600PV(S), 800PV(S), 1000PV(S).
5. Test Class: IEC/EN/VDE Class II/C.
6. Network Type: Photovoltaic system.
7. Protection Mode: +/- — PE, -/+ — PE, +/- — -/+.
8. Nominal Voltage: 500V dc, 600V dc, 800V dc, 1000V dc.
9. Rated Voltage (UCPV): 560V dc, 670V dc, 825V dc, 1060V dc.
10. Max Discharge Current (Imax): 40kA.
11. Nominal Discharge Current (In): 20kA.
12. Voltage Protective Level (Up): ≤2.0kV, ≤2.5kV, ≤3.0kV, ≤3.6kV.
13. Response Time (tA): ≤25ns.
14. Recommended Back-up Fuse: 125A.
15. Isolation Resistance: >10 MΩ.
16. I/O Connections: Multi-core wire: 4mm ~ 25mm.
17. Mounting: 35mm Symmetrical rail (EN50022/DIN46277-3).
18. Operation Temperature Range: -40℃ to +80℃.
19. Humidity: 30% to 90%.
20. Altitude: Up to 3000m.
21. Degree of Protection: IP20.
22. Housing Material: UL94 V-0.
23. Disconnection Indicator: Mechanical indicator (Green: OK, Red: replace).
24. Remote Control Contact: Optional.
Procedures and Recommendations:
- The device is a DC surge protective device used for photovoltaic systems.
- Core components are metal oxide varistor components with high discharge capacity.
- Reliable control is ensured through Thermo Dynamic Control disconnector.
- Optional remote signaling contact for control device.
- Fault indication is provided via a red mark in the inspection window.
- The device is a 3-pole, Y type configuration.
See more
Catalog excerpts
Surge Protective Device for Photovoltaic System ♦ DC surge protective device used for photovoltaic system. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ With Reliable control thanks to Thermo Dynamic Control disconnector. ♦ Remote signaling contact for control device optional. ♦ Fault indication via red mark in the inspection window. ♦ 3 poles, Y type.
Open the catalog to page 1All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures
FV12.5B+C/4-2753 Pages
FV12.5B+C/2-2753 Pages
FV25B+C/3-1000PV3 Pages
FV30B+C/3-1000PVS 36mm2 Pages
FV30B+C/3-1000PVS 18mm3 Pages
FVC10D/2-48PVS2 Pages
iSPD4 Pages
iSPD-M4 Pages
FV30B+C/4-440S3 Pages
FA-SMA-5G 10-K F-F positive2 Pages
FA-SMA-5G-10-K M-F positive2 Pages
FLP03-320-S/G2 Pages
FLP03-275-S/G2 Pages
FLP03-275-P/G2 Pages
FLP03-24-P/G2 Pages
FV30B+C/3+NPE-4201 Page
FV25B/3+NPE-440S1 Page
FV12.5B+C/3-1000PV1 Page
FV12.5B+C/3-500PV1 Page
FV50B/3+NPE-255S1 Page
FV03D/2-25PVL1 Page
FV30B+C/41 Page
FV10D/21 Page
FV40C/3+NPE1 Page
FV25B/4-***S1 Page
FV25B/3-***PV（S）1 Page
FLRC-S/II1 Page
FV20C/2-***PV（S）1 Page
FS-RJ45D/PoE-***1 Page
FLP10-***i-*/BG1 Page
FV25B/3-1000PVS2 Pages
FLRC-D1 Page
FV50B/1 -***（S）1 Page
FV30B+C1 Page
FLRC-L1 Page
FLRC-S/D1 Page
FV20C1 Page
FV25B/3-600 PVS1 Page
FS-RJ45D/POE-1001 Page
FV20C/31 Page
FV50B/1-xxx S series1 Page
Related Searches
- Surge protector
- DIN rail lightning arrester
- Class II surge protector
- Automatic tester
- Generator
- Industrial tester
- Power supply lightning arrester
- Low-voltage lightning arrester
- Voltage testing system
- Class II surge arrester
- AC surge arrester
- Multipole surge arrester
- Plug-in lightning arrester
- Type 1 surge protector
- Digital counter
- Installation tester
- Remote signaling surge arrester
- Varistor surge arrester
- Compact surge suppressor
- Surge arrester with fault indication
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.