*mydirectindustry

Catalogs
FATECH ELECTRONIC (FOSHAN) CO., LTD
FATECH surge arrester FV20C/1+NPE-150 for protection 1 phase system

FATECH surge arrester FV20C/1+NPE-150 for protection 1 phase system

Product catalog summary

Specifications:
The document outlines the specifications for a remote control contact used in surge protective devices. It details the range of signal access and recommended wire specifications for both AC and DC systems. For AC, the maximum voltage is 250V with a current of 0.5A, using single-core wire up to 1.5mm. For DC, the maximum voltage is 60V with a current of 0.1A, using multi-core wire up to 1.3mm. Models without 'S' do not have remote control contact functionality.

Model Numbers:
The models listed include FV20C/1+NPE-150(S), FV20C/1+NPE-275(S), FV20C/1+NPE-320(S), FV20C/1+NPE-385(S), and FV20C/1+NPE-440(S).

Test Class and Network Type:
The devices are tested under IEC/EN/VDE Class II/C and are suitable for TT network types. The protection mode is L-N, N-PE.

Electrical Characteristics:
Nominal voltage is 110/220V~ to 220/380V~ at 50(60)Hz. The rated voltage (UC) ranges from 150V~ to 440V~. Maximum discharge current (Imax) is 40kA, and nominal discharge current (In) is 20kA. Voltage protective levels (Up) vary from ≤0.7kV to ≤2.0kV for L-N and ≤1.5kV for N-PE. Response time is ≤25ns for L-N and ≤100ns for N-PE.

Installation and Operation:
Recommended back-up fuse is 125A. Isolation resistance is greater than 10 MΩ. I/O connections use multi-core wire ranging from 4mm to 25mm. The device mounts on a 35mm symmetrical rail (EN50022/DIN46277-3). Operating temperature range is -40℃ to +80℃, with humidity between 30% and 90%, and altitude up to 3000m. The degree of protection is IP20, and the housing material is UL94 V-0.

Additional Features:
The device includes a mechanical disconnection indicator (green for OK, red for replace) and optional remote control contact. It consists of a base part and MOV + GDT pluggable protection modules, suitable for lightning protection zones at boundary 1-2. It features metal oxide varistor components with high discharge capacity, low residual voltage, quick response, and reliable control via Thermo Dynamic Control disconnector. Fault indication is provided via a red mark in the inspection window.

Catalog excerpts

FATECH surge arrester FV20C/1+NPE-150 for protection 1 phase system-1

Surge Protective Device for Low-voltage Power System FV20C/1+NPE ***(S) ♦ Consisting of a base part and MOV + GDT pluggable protection modules. ♦ For using in the lightning protection zones concept at boundary 1-2. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ Low residual voltage and quick response. ♦ Reliable control thanks to Thermo Dynamic Control disconnector. ♦ With remote signaling contact for control device. ♦ Fault indication via red mark in the inspection window. ♦ Protection mode: L-N,N-PE. Remark: if the model number is without“S”, the model is without remote control contact function

Open the catalog to page 1

All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list