- Catalogs
- FATECH ELECTRONIC (FOSHAN) CO., LTD
- FATECH surge arrester FV10D series for power supply system
FATECH surge arrester FV10D series for power supply system
FATECH surge arrester FV10D series for power supply system
1. Remote Control Contact: Available for models with 'S'.
2. AC Specifications: Voltage ≤250V, Current ≤0.5A, Single core wire max 1.5mm².
3. DC Specifications: Voltage ≤60V, Current ≤0.1A, Multi-core wire max 1.3mm².
4. Model Variants: FV10D/4-150(S), FV10D/4-275(S), FV10D/4-320(S), FV10D/4-385(S), FV10D/4-440(S).
5. Test Class: IEC/EN/VDE Class II+III/C+D.
6. Network Type: TT, TN.
7. Protection Mode: L1, L2, L3, N-PE.
8. Nominal Voltage: 110/220V~ to 220/380V~.
9. Rated Voltage (UC): 150V~ to 440V~.
10. Max Discharge Current (Imax): 20kA.
11. Nominal Discharge Current (In): 10kA.
12. Voltage Protective Level (Up): ≤0.6kV to ≤2.0kV.
13. Open Circuit Voltage (Uoc): 20kV.
14. Response Time (tA): ≤25ns.
15. Recommended Back-up Fuse: 63A.
16. Isolation Resistance: >10 MΩ.
17. I/O Connections: Multi-core wire: 4mm² ~ 25mm².
18. Mounting: 35mm Symmetrical rail (EN50022/DIN46277-3).
19. Operation Temperature Range: -40℃ to +80℃.
20. Humidity: 30% to 90%.
21. Altitude: Up to 3000m.
22. Degree of Protection: IP20.
23. Housing Material: UL94 V-0.
24. Disconnection Indicator: Mechanical (Green: OK, Red: replace).
25. Remote Control Contact: Optional.
Procedures and Recommendations:
- The device consists of a base part and MOV pluggable protection modules.
- Designed for use in lightning protection zones at boundary 1-2.
- Core parts are metal oxide varistor components with high discharge capacity.
- Features low residual voltage and quick response.
- Reliable control with Thermo Dynamic Control disconnector.
- Fault indication via red mark in the inspection window.
Dimensions:
- 45mm x 66mm x 90mm (WxHxD).
Catalog excerpts
Surge Protective Device for Low-voltage Power System ♦ Consisting of a base part and MOV pluggable protection modules. ♦ For using in the lightning protection zones concept at boundary 1-2. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ Low residual voltage and quick response. ♦ Reliable control thanks to Thermo Dynamic Control disconnector. ♦ With remote signaling contact for control device. ♦ Fault indication via red mark in the inspection window. ♦ Protection mode: L1,L2,L3,N-PE. Remark: if the model number is without“S”, the model is without remote control contact function
Open the catalog to page 1All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures
FV12.5B+C/4-2753 Pages
FV12.5B+C/2-2753 Pages
FV25B+C/3-1000PV3 Pages
FV30B+C/3-1000PVS 36mm2 Pages
FV30B+C/3-1000PVS 18mm3 Pages
FVC10D/2-48PVS2 Pages
iSPD4 Pages
iSPD-M4 Pages
FV30B+C/4-440S3 Pages
FA-SMA-5G 10-K F-F positive2 Pages
FA-SMA-5G-10-K M-F positive2 Pages
FLP03-320-S/G2 Pages
FLP03-275-S/G2 Pages
FLP03-275-P/G2 Pages
FLP03-24-P/G2 Pages
FV30B+C/3+NPE-4201 Page
FV25B/3+NPE-440S1 Page
FV12.5B+C/3-1000PV1 Page
FV12.5B+C/3-500PV1 Page
FV50B/3+NPE-255S1 Page
FV03D/2-25PVL1 Page
FV30B+C/41 Page
FV10D/21 Page
FV40C/3+NPE1 Page
FV25B/4-***S1 Page
FV25B/3-***PV（S）1 Page
FLRC-S/II1 Page
FV20C/2-***PV（S）1 Page
FS-RJ45D/PoE-***1 Page
FLP10-***i-*/BG1 Page
FV25B/3-1000PVS2 Pages
FLRC-D1 Page
FV50B/1 -***（S）1 Page
FV30B+C1 Page
FLRC-L1 Page
FLRC-S/D1 Page
FV20C1 Page
FV25B/3-600 PVS1 Page
FS-RJ45D/POE-1001 Page
FV20C/31 Page
FV50B/1-xxx S series1 Page
- Surge protector
- DIN rail lightning arrester
- Class II surge protector
- Automatic tester
- Generator
- Industrial tester
- Power supply lightning arrester
- Low-voltage lightning arrester
- Voltage testing system
- Class II surge arrester
- AC surge arrester
- Multipole surge arrester
- Plug-in lightning arrester
- Type 1 surge protector
- Digital counter
- Installation tester
- Remote signaling surge arrester
- Varistor surge arrester
- Compact surge suppressor
- Surge arrester with fault indication