- Catalogs
- FATECH ELECTRONIC (FOSHAN) CO., LTD
- FATECH surge arrester FV10D/1+NPE-275 for single phase power protection
FATECH surge arrester FV10D/1+NPE-275 for single phase power protection
FATECH surge arrester FV10D/1+NPE-275 for single phase power protection
- Remote Control Contact: Available for models with 'S' in the model number.
- AC Specifications: Voltage ≤250Vmax, Current ≤0.5Amax, Single core wire ≤1.5mm².
- DC Specifications: Voltage ≤60Vmax, Current ≤0.1Amax, Multi-core wire ≤1.3mm².
- Test Class: IEC/EN/VDE Class II+III/C+D.
- Network Type: TT.
- Protection Mode: L-N, N-PE.
- Nominal Voltage: 50(60)Hz UN 110V/220V ac, 230V/400V ac.
- Rated Voltage (UC): Ranges from 150V ac to 440V ac depending on the model.
- Max Discharge Current (Imax): 20kA.
- Nominal Discharge Current (In): 10kA.
- Voltage Protective Level (Up): L-N ranges from ≤0.7kV to ≤2.0kV, N-PE ≤1.5kV.
- Open Circuit Voltage (Uoc): 20kV.
- Response Time: L-N ≤25ns, N-PE ≤100ns.
- Recommended Back-up Fuse: 125A.
- Isolation Resistance: >10 MΩ.
- I/O Connections: Multi-core wire: 4mm² ~ 25mm².
- Mounting: 35mm Symmetrical rail (EN50022/DIN46277-3).
- Operation Temperature Range: -40℃ to +80℃.
- Humidity: 30% to 90%.
- Altitude: Up to 3000m.
- Degree of Protection: IP20.
- Housing Material: UL94 V-0.
- Disconnection Indicator: Mechanical indicator (Green: OK, Red: replace).
- Remote Control Contact: Optional.
- Consists of a base part and MOV + GDT pluggable protection modules.
- Suitable for use in lightning protection zones at boundary 1-2.
- Core parts are metal oxide varistor components with high discharge capacity.
- Low residual voltage and quick response.
- Reliable control with Thermo Dynamic Control disconnector.
- Remote signaling contact for control device.
- Fault indication via red mark in the inspection window.
- Protection mode: L-N, N-PE.
Catalog excerpts
Surge Protective Device for Low-voltage Power System ♦ Consisting of a base part and MOV + GDT pluggable protection modules. ♦ For using in the lightning protection zones concept at boundary 1-2. ♦ The core parts are metal oxide vristor components with high discharge capacity. ♦ Low residual voltage and quick response. ♦ Reliable control thanks to Thermo Dynamic Control disconnector. ♦ With remote signaling contact for control device. ♦ Fault indication via red mark in the inspection window. ♦ Protection mode: L-N,N-PE. Remark: if the model number is withoufi'S”, the model is without remote control contact function
Open the catalog to page 1All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures
FV12.5B+C/4-2753 Pages
FV12.5B+C/2-2753 Pages
FV25B+C/3-1000PV3 Pages
FV30B+C/3-1000PVS 36mm2 Pages
FV30B+C/3-1000PVS 18mm3 Pages
FVC10D/2-48PVS2 Pages
iSPD4 Pages
iSPD-M4 Pages
FV30B+C/4-440S3 Pages
FA-SMA-5G 10-K F-F positive2 Pages
FA-SMA-5G-10-K M-F positive2 Pages
FLP03-320-S/G2 Pages
FLP03-275-S/G2 Pages
FLP03-275-P/G2 Pages
FLP03-24-P/G2 Pages
FV30B+C/3+NPE-4201 Page
FV25B/3+NPE-440S1 Page
FV12.5B+C/3-1000PV1 Page
FV12.5B+C/3-500PV1 Page
FV50B/3+NPE-255S1 Page
FV03D/2-25PVL1 Page
FV30B+C/41 Page
FV10D/21 Page
FV40C/3+NPE1 Page
FV25B/4-***S1 Page
FV25B/3-***PV（S）1 Page
FLRC-S/II1 Page
FV20C/2-***PV（S）1 Page
FS-RJ45D/PoE-***1 Page
FLP10-***i-*/BG1 Page
FV25B/3-1000PVS2 Pages
FLRC-D1 Page
FV50B/1 -***（S）1 Page
FV30B+C1 Page
FLRC-L1 Page
FLRC-S/D1 Page
FV20C1 Page
FV25B/3-600 PVS1 Page
FS-RJ45D/POE-1001 Page
FV20C/31 Page
FV50B/1-xxx S series1 Page
- Surge protector
- DIN rail lightning arrester
- Class II surge protector
- Automatic tester
- Generator
- Industrial tester
- Power supply lightning arrester
- Low-voltage lightning arrester
- Voltage testing system
- Class II surge arrester
- AC surge arrester
- Multipole surge arrester
- Plug-in lightning arrester
- Type 1 surge protector
- Digital counter
- Installation tester
- Remote signaling surge arrester
- Varistor surge arrester
- Compact surge suppressor
- Surge arrester with fault indication