*mydirectindustry

Catalogs
FATECH ELECTRONIC (FOSHAN) CO., LTD
FATECH surge arrester CE certificate of ac spd

FATECH surge arrester CE certificate of ac spd

Product catalog summary

Certificate of Compliance Overview

This document is a Certificate of Compliance issued by ISET S.r.l. for Fatech Electronic (Foshan) Co., Ltd., located in Foshan City, Guangdong Province, China. The certificate number is IT031422FT170630.

Directive and Standards

The certificate references the Low Voltage Directive 2014/35/EU and applies the harmonized standard IEC 61643-11: 2011.

Product Characteristics

The products covered under this certificate are Surge Protective Devices with models including FV10D (S), FV20C (S), FV30C (S), FV40C (S), FV50C (S), FV30B+C (S), FV40B+C (S), FVB12.5B+C (S), FV25B (S), and FV50B (S).

Remarks and Responsibilities

The verification was conducted voluntarily by the manufacturer based on their provided documents. The products meet the requirements of the ISET Certification Mark. The manufacturer is responsible for maintaining internal production control to ensure ongoing compliance. ISET is not liable for any noncompliance in documents, products, or test reports submitted for evaluation. The manufacturer must ensure compliance with applicable directives and procedures before applying the CE mark and is responsible for any misuse of this verification.

Certification Validity

The certificate was issued on 30/06/2017 and expired on 29/06/2022.

Catalog excerpts

FATECH surge arrester CE certificate of ac spd-1

ISET S.r.l. Sede Legale e Uffici Via Donatori di sangue, 9 - 46024 Moglia (MN) Tel. e fax +39 (0)376 598963 [email protected] www.iset-italia.eu Cap. soc. i.v. Cod. Fisc. e P.IVA Reg. Imprese REA CERTIFICATE OF COMPLIANCE Certificado de Conformidade - Сертификат соответствия - Konformitä tserklä rung 1) APPLICANT: Fatech Electronic (Foshan) Co., Ltd. 2nd Floor, Bldg D7,Guangdong New Light Production Base,Luocun, Shishan Town, Nanhai District, Foshan City, Guangdong Province, China. 3) WITH REFERENCE TO EC DIRECTIVE APPLIED: Low Voltage Directive 2014/35/EU 4) CERTIFICATION ISET MARK: HARMONIZED STANDARDS APPLIED: IEC 61643-11: 2011 5) PRODUCT CHARACTERISTICS: Surge Protective Device MODEL(S): FV10D (S), FV20C (S), FV30C (S), FV40C (S), FV50C (S), FV30B+C (S), FV40B+C (S), FVB12.5B+C (S), FV25B (S), FV50B (S) REMARK: The verification has been carried out on voluntary application of the manufacturer based only on the documents prepared and provided by the manufacturer itself. The product(s) satisfies the requirements of the Certification Mark of ISET according to the ISET regulations. The manufacturer is responsible to maintain the internal production control to ensure the compliance of the product. ISET declines any liability with reference to any other noncompliance of documents, product or test report that have been submitted to evaluation. However marking and EC declaration are duties of the manufacturer before putting into service of its product(s) on market as well as the verification doesn’t imply assessment of the production of the product(s).The manufacturer is liable to take all the necessary actions required by the applicable directives&procedures before putting CE mark on the product(s).The manufacturer should be responsible for the results caused by improperly use this verification. CERTIFICATION MANAGER:

Open the catalog to page 1

All FATECH ELECTRONIC (FOSHAN) CO., LTD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list